Australian Capital Territory · pool and spa barriers
Pool fence rules in Australian Capital Territory.
The state pool barrier summary lists a minimum height of 1.2 m. Check your pool, boundary and local approval requirements before building.
Published state rule
1.2 m
Barriers at least 1.2 m high. Every home pool and spa must meet the barrier standard by 1 May 2028.
Pool or spaBarrier standards apply
Check firstRegistration and inspections vary
01Key rules
Australian Capital Territory pool barrier rules
Minimum height
1.2 m
Published summary
Barriers at least 1.2 m high. Every home pool and spa must meet the barrier standard by 1 May 2028.
Official wording
Read the official wording
Under the home swimming pool safety reforms, from 1 May 2028 every home pool and spa in the ACT must have a safety barrier meeting the prescribed standards (for pools built before 1 May 2023: current BCA plus AS 1926.1-2012 and AS 1926.2-2007). Since 1 May 2024 owners must maintain barriers and keep gates, doors and covers closed.
Source ↗ · checked 16 Nov 2026Read the official wording
A pool barrier inside the property should be at least 1.2 m high all round (measured outside the pool area) with a 90 cm non-climbable zone, no more than 10 cm ground gap, no openings over 10 cm, and self-closing, self-latching gates. A boundary fence forming part of the barrier should be at least 1.8 m high measured from inside the pool area. Barriers must meet the NCC and AS 1926.1-2012; a pool needing building approval cannot be used until a certifier has checked it and a Certificate of Occupancy and Use is issued.