Work out your fence
The block size is Median of 2 house lots in Werrimull. The metres are an estimate; change them to match your property.
Werrimull 3496 · Mildura · Victoria
A standard fence costs $110–$160/m installed. Your half of a typical dividing fence is about $2,460–$3,550.
Your 50/50 share · treated pine paling
$2,460–$3,550
44.4 m on a typical block · Wider-area fencers’ prices (7 fencers)
The block size is Median of 2 house lots in Werrimull. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontWider-area fencers’ prices (7 fencers) | $110–$160/m | $2,460–$3,550 | $4,930–$7,100 | $2,190–$3,150 |
| Colorbond steeldividing, frontWider-area fencers’ prices (8 fencers) | $120–$180/m | $2,640–$4,060 | $5,280–$8,130 | $2,340–$3,610 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $670–$3,330 | $1,330–$6,660 | $590–$2,960 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $890–$2,000 | $1,780–$4,000 | $790–$1,770 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $1,290–$7,770 | $2,580–$15,540 | $1,140–$6,900 |
| Hardwood paling / lapped and cappeddividing, frontNational range (few local prices yet) | $80–$220/m | $1,780–$4,880 | $3,550–$9,770 | $1,580–$4,330 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $4,000–$7,770 | $7,990–$15,540 | $3,550–$6,900 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $4,440–$6,110 | $8,880–$12,210 | $3,940–$5,420 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $5,550–$9,990 | $11,100–$19,980 | $4,930–$8,870 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $6,110–$15,540+ | $12,210–$31,080+ | $5,420–$13,790+ |
| Aluminium slat / pool fencingpool, front, screen, dividingWider-area fencers’ prices (4 fencers) | $310–$590/m | $6,950–$13,140 | $13,900–$26,280 | $6,170–$11,660 |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $9,990–$22,200 | $19,980–$44,400 | $8,870–$19,700 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $11,100–$26,640+ | $22,200–$53,280+ | $9,850–$23,640+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $17,760–$26,640 | $35,520–$53,280 | $15,760–$23,640 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Mildura fence rules · Read the full rules
We’ve checked some of Mildura’s pages, not all. Where there’s no council rule on file we show the Victoria rule. Check with council before you build.
A treated pine paling fence is $110–$160/m. Your typical 50/50 share for 44.4 m is $2,460–$3,550.
Neighbours usually split a sufficient dividing fence 50/50. If you want something better, you pay the difference.
Up to 1.5 m within 3 m of the street (2 m on a declared main road), unless your planning zone sets a lower limit, sometimes 1.2 m.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
The property owner usually pays the full cost. About 50% of local lots have a laneway.
Block-size source: Vicmap Property, Vicmap Admin and road casements © Department of Transport and Planning, CC BY 4.0. Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Werrimull is $2,460–$3,550.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.