Work out your fence
The block size is Median of 47 house lots in Walwa. The metres are an estimate; change them to match your property.
Walwa 3709 · Towong · Victoria
A standard fence costs $120–$150/m installed. Your half of a typical dividing fence is about $6,720–$8,700.
Your 50/50 share · treated pine paling
$6,720–$8,700
113 m on a typical block · VIC median of fencers’ prices
The block size is Median of 47 house lots in Walwa. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontVIC median of fencers’ prices | $120–$150/m | $6,720–$8,700 | $13,450–$17,400 | $2,250–$2,910 |
| Colorbond steeldividing, frontVIC median of fencers’ prices | $140–$180/m | $7,740–$10,000 | $15,480–$20,000 | $2,590–$3,350 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,700–$8,480 | $3,390–$16,950 | $570–$2,840 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $2,260–$5,090 | $4,520–$10,170 | $760–$1,700 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $3,280–$19,780 | $6,550–$39,550 | $1,100–$6,610 |
| Hardwood paling / lapped and cappeddividing, frontNational range (few local prices yet) | $80–$220/m | $4,520–$12,430 | $9,040–$24,860 | $1,510–$4,160 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $10,170–$19,780 | $20,340–$39,550 | $3,400–$6,610 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $11,300–$15,540 | $22,600–$31,080 | $3,780–$5,200 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $14,130–$25,430 | $28,250–$50,850 | $4,730–$8,510 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $15,540–$39,550+ | $31,080–$79,100+ | $5,200–$13,230+ |
| Aluminium slat / pool fencingpool, front, screen, dividingVIC median of fencers’ prices | $350–$510/m | $19,780–$28,820 | $39,550–$57,630 | $6,610–$9,640 |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $25,430–$56,500 | $50,850–$113,000 | $8,510–$18,900 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $28,250–$67,800+ | $56,500–$135,600+ | $9,450–$22,680+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $45,200–$67,800 | $90,400–$135,600 | $15,120–$22,680 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Towong fence rules · Read the full rules
We’ve checked some of Towong’s pages, not all. Where there’s no council rule on file we show the Victoria rule. Check with council before you build.
A treated pine paling fence is $120–$150/m. Your typical 50/50 share for 113 m is $6,720–$8,700.
Neighbours usually split a sufficient dividing fence 50/50. If you want something better, you pay the difference.
Up to 1.5 m within 3 m of the street (2 m on a declared main road), unless your planning zone sets a lower limit, sometimes 1.2 m.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: Vicmap Property, Vicmap Admin and road casements © Department of Transport and Planning, CC BY 4.0. Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Walwa is $6,720–$8,700.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.