Work out your fence
The block size is Median of 2 house lots in Vectis. The metres are an estimate; change them to match your property.
Vectis 3401 · Horsham · Victoria
A standard fence costs $110–$160/m installed. Your half of a typical dividing fence is about $4,690–$6,760.
Your 50/50 share · treated pine paling
$4,690–$6,760
84.5 m on a typical block · Wider-area fencers’ prices (7 fencers)
The block size is Median of 2 house lots in Vectis. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontWider-area fencers’ prices (7 fencers) | $110–$160/m | $4,690–$6,760 | $9,380–$13,520 | $2,240–$3,230 |
| Colorbond steeldividing, frontWider-area fencers’ prices (8 fencers) | $120–$180/m | $5,030–$7,730 | $10,060–$15,460 | $2,400–$3,700 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,270–$6,340 | $2,540–$12,680 | $610–$3,030 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $1,690–$3,800 | $3,380–$7,610 | $810–$1,820 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $2,450–$14,790 | $4,900–$29,580 | $1,170–$7,070 |
| Hardwood paling / lapped and cappeddividing, frontNational range (few local prices yet) | $80–$220/m | $3,380–$9,300 | $6,760–$18,590 | $1,620–$4,440 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $7,610–$14,790 | $15,210–$29,580 | $3,640–$7,070 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $8,450–$11,620 | $16,900–$23,240 | $4,040–$5,560 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $10,560–$19,010 | $21,130–$38,030 | $5,050–$9,090 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $11,620–$29,580+ | $23,240–$59,150+ | $5,560–$14,140+ |
| Aluminium slat / pool fencingpool, front, screen, dividingWider-area fencers’ prices (4 fencers) | $310–$590/m | $13,220–$25,010 | $26,450–$50,020 | $6,320–$11,960 |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $19,010–$42,250 | $38,030–$84,500 | $9,090–$20,200 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $21,130–$50,700+ | $42,250–$101,400+ | $10,100–$24,240+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $33,800–$50,700 | $67,600–$101,400 | $16,160–$24,240 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Horsham fence rules · Read the full rules
A treated pine paling fence is $110–$160/m. Your typical 50/50 share for 84.5 m is $4,690–$6,760.
Neighbours usually split a sufficient dividing fence 50/50. If you want something better, you pay the difference.
Timber and steel front fences up to 1.5 m (brick or stone 1.2 m) need no building permit. On a corner, 1 m within 9 m of the intersection.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: Vicmap Property, Vicmap Admin and road casements © Department of Transport and Planning, CC BY 4.0. Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Vectis is $4,690–$6,760.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.