Work out your fence
The block size is Median of 1 house lots in Upton Hill. The metres are an estimate; change them to match your property.
Upton Hill 3664 · Strathbogie · Victoria
A standard fence costs $120–$150/m installed. Your half of a typical dividing fence is about $3,080–$3,980.
Your 50/50 share · treated pine paling
$3,080–$3,980
51.7 m on a typical block · VIC median of fencers’ prices
The block size is Median of 1 house lots in Upton Hill. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontVIC median of fencers’ prices | $120–$150/m | $3,080–$3,980 | $6,150–$7,960 | $1,920–$2,480 |
| Colorbond steeldividing, frontVIC median of fencers’ prices | $140–$180/m | $3,540–$4,580 | $7,080–$9,150 | $2,210–$2,850 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $780–$3,880 | $1,550–$7,760 | $480–$2,420 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $1,030–$2,330 | $2,070–$4,650 | $640–$1,450 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $1,500–$9,050 | $3,000–$18,100 | $930–$5,640 |
| Hardwood paling / lapped and cappeddividing, frontNational range (few local prices yet) | $80–$220/m | $2,070–$5,690 | $4,140–$11,370 | $1,290–$3,540 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $4,650–$9,050 | $9,310–$18,100 | $2,900–$5,640 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $5,170–$7,110 | $10,340–$14,220 | $3,220–$4,430 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $6,460–$11,630 | $12,930–$23,270 | $4,030–$7,250 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $7,110–$18,100+ | $14,220–$36,190+ | $4,430–$11,270+ |
| Aluminium slat / pool fencingpool, front, screen, dividingVIC median of fencers’ prices | $350–$510/m | $9,050–$13,180 | $18,100–$26,370 | $5,640–$8,210 |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $11,630–$25,850 | $23,270–$51,700 | $7,250–$16,100 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $12,930–$31,020+ | $25,850–$62,040+ | $8,050–$19,320+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $20,680–$31,020 | $41,360–$62,040 | $12,880–$19,320 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Strathbogie fence rules · Read the full rules
We’ve checked some of Strathbogie’s pages, not all. Where there’s no council rule on file we show the Victoria rule. Check with council before you build.
A treated pine paling fence is $120–$150/m. Your typical 50/50 share for 51.7 m is $3,080–$3,980.
Neighbours usually split a sufficient dividing fence 50/50. If you want something better, you pay the difference.
Up to 1.5 m within 3 m of the street (2 m on a declared main road), unless your planning zone sets a lower limit, sometimes 1.2 m.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: Vicmap Property, Vicmap Admin and road casements © Department of Transport and Planning, CC BY 4.0. Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Upton Hill is $3,080–$3,980.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.