Work out your fence
The block size is the median of 35 house lots in Toongabbie. The metres are an estimate; change them to match your property.
Toongabbie 3856 · Latrobe · Victoria
A standard fence costs $110–$160/m installed. Your half of a typical dividing fence is about $6,620–$9,540.
Your 50/50 share · treated pine paling
$6,620–$9,540
119.3 m on a typical block · Wider-area fencers’ prices (7 fencers)
The block size is the median of 35 house lots in Toongabbie. The metres are an estimate; change them to match your property.
| Fence | Per metre | Your share | Whole fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontWider-area fencers’ prices (7 fencers) | $110–$160/m | $6,620–$9,540 | $13,240–$19,090 | $2,460–$3,550 |
| Colorbond steeldividing, frontWider-area fencers’ prices (8 fencers) | $120–$180/m | $7,100–$10,920 | $14,200–$21,830 | $2,640–$4,060 |
| Chain wire / chain linkdividingNational price | $30–$150/m | $1,790–$8,950 | $3,580–$17,900 | $670–$3,330 |
| PVC / vinylfront, dividingNational price | $40–$90/m | $2,390–$5,370 | $4,770–$10,740 | $890–$2,000 |
| Timber picketfrontNational price | $60–$350/m | $3,460–$20,880 | $6,920–$41,760 | $1,290–$7,770 |
| Hardwood paling / lapped and cappeddividing, frontNational price | $80–$220/m | $4,770–$13,120 | $9,540–$26,250 | $1,780–$4,880 |
| Tubular metalfront, poolNational price | $180–$350/m | $10,740–$20,880 | $21,470–$41,760 | $4,000–$7,770 |
| Semi-frameless glasspool, frontNational price | $200–$280/m | $11,930–$16,400 | $23,860–$32,810 | $4,440–$6,110 |
| Timber slat / horizontal slat screenscreen, front, dividingNational price | $250–$450/m | $14,910–$26,840 | $29,830–$53,690 | $5,550–$9,990 |
| Frameless glasspoolNational price | $280–$700+/m | $16,400–$41,760+ | $32,810–$83,510+ | $6,110–$15,540+ |
| Aluminium slat / pool fencingpool, front, screen, dividingWider-area fencers’ prices (4 fencers) | $310–$590/m | $18,670–$35,310 | $37,340–$70,630 | $6,950–$13,140 |
| Wrought iron / cast ironfrontNational price | $450–$1,000/m | $26,840–$59,650 | $53,690–$119,300 | $9,990–$22,200 |
| Brick, stone or rendered masonryfront, dividingNational price | $500–$1,200+/m | $29,830–$71,580+ | $59,650–$143,160+ | $11,100–$26,640+ |
| Sandstone and timberfrontNational price | $800–$1,200/m | $47,720–$71,580 | $95,440–$143,160 | $17,760–$26,640 |
Rows marked National price use the national range because we have fewer than 2 local fencer prices for that type. See published prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Latrobe fence rules · Read the full rules
A treated pine paling fence is $110–$160/m. Your typical 50/50 share for 119.3 m is $6,620–$9,540.
Neighbours usually split a sufficient dividing fence 50/50. If you want something better, you pay the difference.
Up to 1.5 m without a building permit (1.2 m if masonry or concrete).
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: Vicmap Property, Vicmap Admin and road casements © Department of Transport and Planning, CC BY 4.0. Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Toongabbie is $6,620–$9,540.