Work out your fence
The block size is Median of 1 house lots in Riverside. The metres are an estimate; change them to match your property.
Riverside 3401 · Horsham · Victoria
A standard fence costs $110–$160/m installed. Your half of a typical dividing fence is about $20,340–$29,310.
Your 50/50 share · treated pine paling
$20,340–$29,310
366.4 m on a typical block · Wider-area fencers’ prices (7 fencers)
The block size is Median of 1 house lots in Riverside. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontWider-area fencers’ prices (7 fencers) | $110–$160/m | $20,340–$29,310 | $40,670–$58,620 | $840–$1,220 |
| Colorbond steeldividing, frontWider-area fencers’ prices (8 fencers) | $120–$180/m | $21,800–$33,530 | $43,600–$67,050 | $900–$1,390 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $5,500–$27,480 | $10,990–$54,960 | $230–$1,140 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $7,330–$16,490 | $14,660–$32,980 | $300–$680 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $10,630–$64,120 | $21,250–$128,240 | $440–$2,660 |
| Hardwood paling / lapped and cappeddividing, frontNational range (few local prices yet) | $80–$220/m | $14,660–$40,300 | $29,310–$80,610 | $610–$1,670 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $32,980–$64,120 | $65,950–$128,240 | $1,370–$2,660 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $36,640–$50,380 | $73,280–$100,760 | $1,520–$2,090 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $45,800–$82,440 | $91,600–$164,880 | $1,900–$3,420 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $50,380–$128,240+ | $100,760–$256,480+ | $2,090–$5,320+ |
| Aluminium slat / pool fencingpool, front, screen, dividingWider-area fencers’ prices (4 fencers) | $310–$590/m | $57,340–$108,450 | $114,680–$216,910 | $2,380–$4,500 |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $82,440–$183,200 | $164,880–$366,400 | $3,420–$7,600 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $91,600–$219,840+ | $183,200–$439,680+ | $3,800–$9,120+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $146,560–$219,840 | $293,120–$439,680 | $6,080–$9,120 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Horsham fence rules · Read the full rules
A treated pine paling fence is $110–$160/m. Your typical 50/50 share for 366.4 m is $20,340–$29,310.
Neighbours usually split a sufficient dividing fence 50/50. If you want something better, you pay the difference.
Timber and steel front fences up to 1.5 m (brick or stone 1.2 m) need no building permit. On a corner, 1 m within 9 m of the intersection.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: Vicmap Property, Vicmap Admin and road casements © Department of Transport and Planning, CC BY 4.0. Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Riverside is $20,340–$29,310.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.