Work out your fence
The block size is Median of 10 house lots in Panmure. The metres are an estimate; change them to match your property.
Panmure 3265 · Moyne · Victoria
A standard fence costs $120–$150/m installed. Your half of a typical dividing fence is about $6,770–$8,760.
Your 50/50 share · treated pine paling
$6,770–$8,760
113.8 m on a typical block · VIC median of fencers’ prices
The block size is Median of 10 house lots in Panmure. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontVIC median of fencers’ prices | $120–$150/m | $6,770–$8,760 | $13,540–$17,530 | $2,630–$3,400 |
| Colorbond steeldividing, frontVIC median of fencers’ prices | $140–$180/m | $7,800–$10,070 | $15,590–$20,140 | $3,030–$3,910 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,710–$8,540 | $3,410–$17,070 | $660–$3,320 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $2,280–$5,120 | $4,550–$10,240 | $880–$1,990 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $3,300–$19,920 | $6,600–$39,830 | $1,280–$7,740 |
| Hardwood paling / lapped and cappeddividing, frontNational range (few local prices yet) | $80–$220/m | $4,550–$12,520 | $9,100–$25,040 | $1,770–$4,860 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $10,240–$19,920 | $20,480–$39,830 | $3,980–$7,740 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $11,380–$15,650 | $22,760–$31,300 | $4,420–$6,080 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $14,230–$25,610 | $28,450–$51,210 | $5,530–$9,950 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $15,650–$39,830+ | $31,300–$79,660+ | $6,080–$15,470+ |
| Aluminium slat / pool fencingpool, front, screen, dividingVIC median of fencers’ prices | $350–$510/m | $19,920–$29,020 | $39,830–$58,040 | $7,740–$11,270 |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $25,610–$56,900 | $51,210–$113,800 | $9,950–$22,100 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $28,450–$68,280+ | $56,900–$136,560+ | $11,050–$26,520+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $45,520–$68,280 | $91,040–$136,560 | $17,680–$26,520 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Moyne fence rules · Read the full rules
We’ve checked some of Moyne’s pages, not all. Where there’s no council rule on file we show the Victoria rule. Check with council before you build.
A treated pine paling fence is $120–$150/m. Your typical 50/50 share for 113.8 m is $6,770–$8,760.
Neighbours usually split a sufficient dividing fence 50/50. If you want something better, you pay the difference.
Up to 1.5 m within 3 m of the street (2 m on a declared main road), unless your planning zone sets a lower limit, sometimes 1.2 m.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: Vicmap Property, Vicmap Admin and road casements © Department of Transport and Planning, CC BY 4.0. Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Panmure is $6,770–$8,760.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.