Work out your fence
The block size is Median of 1 house lots in Mitre. The metres are an estimate; change them to match your property.
Mitre 3409 · Horsham · Victoria
A standard fence costs $110–$160/m installed. Your half of a typical dividing fence is about $6,600–$9,510.
Your 50/50 share · treated pine paling
$6,600–$9,510
118.9 m on a typical block · Wider-area fencers’ prices (7 fencers)
The block size is Median of 1 house lots in Mitre. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontWider-area fencers’ prices (7 fencers) | $110–$160/m | $6,600–$9,510 | $13,200–$19,020 | $2,460–$3,550 |
| Colorbond steeldividing, frontWider-area fencers’ prices (8 fencers) | $120–$180/m | $7,070–$10,880 | $14,150–$21,760 | $2,640–$4,060 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,780–$8,920 | $3,570–$17,840 | $670–$3,330 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $2,380–$5,350 | $4,760–$10,700 | $890–$2,000 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $3,450–$20,810 | $6,900–$41,620 | $1,290–$7,770 |
| Hardwood paling / lapped and cappeddividing, frontNational range (few local prices yet) | $80–$220/m | $4,760–$13,080 | $9,510–$26,160 | $1,780–$4,880 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $10,700–$20,810 | $21,400–$41,620 | $4,000–$7,770 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $11,890–$16,350 | $23,780–$32,700 | $4,440–$6,110 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $14,860–$26,750 | $29,730–$53,510 | $5,550–$9,990 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $16,350–$41,620+ | $32,700–$83,230+ | $6,110–$15,540+ |
| Aluminium slat / pool fencingpool, front, screen, dividingWider-area fencers’ prices (4 fencers) | $310–$590/m | $18,610–$35,190 | $37,220–$70,390 | $6,950–$13,140 |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $26,750–$59,450 | $53,510–$118,900 | $9,990–$22,200 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $29,730–$71,340+ | $59,450–$142,680+ | $11,100–$26,640+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $47,560–$71,340 | $95,120–$142,680 | $17,760–$26,640 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Horsham fence rules · Read the full rules
A treated pine paling fence is $110–$160/m. Your typical 50/50 share for 118.9 m is $6,600–$9,510.
Neighbours usually split a sufficient dividing fence 50/50. If you want something better, you pay the difference.
Timber and steel front fences up to 1.5 m (brick or stone 1.2 m) need no building permit. On a corner, 1 m within 9 m of the intersection.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: Vicmap Property, Vicmap Admin and road casements © Department of Transport and Planning, CC BY 4.0. Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Mitre is $6,600–$9,510.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.