Work out your fence
The block size is Median of 38 house lots in Merino. The metres are an estimate; change them to match your property.
Merino 3310 · Glenelg · Victoria
A standard fence costs $120–$150/m installed. Your half of a typical dividing fence is about $7,080–$9,160.
Your 50/50 share · treated pine paling
$7,080–$9,160
119 m on a typical block · VIC median of fencers’ prices
The block size is Median of 38 house lots in Merino. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontVIC median of fencers’ prices | $120–$150/m | $7,080–$9,160 | $14,160–$18,330 | $2,630–$3,400 |
| Colorbond steeldividing, frontVIC median of fencers’ prices | $140–$180/m | $8,150–$10,530 | $16,300–$21,060 | $3,030–$3,910 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,790–$8,930 | $3,570–$17,850 | $660–$3,320 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $2,380–$5,360 | $4,760–$10,710 | $880–$1,990 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $3,450–$20,830 | $6,900–$41,650 | $1,280–$7,740 |
| Hardwood paling / lapped and cappeddividing, frontNational range (few local prices yet) | $80–$220/m | $4,760–$13,090 | $9,520–$26,180 | $1,770–$4,860 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $10,710–$20,830 | $21,420–$41,650 | $3,980–$7,740 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $11,900–$16,360 | $23,800–$32,730 | $4,420–$6,080 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $14,880–$26,780 | $29,750–$53,550 | $5,530–$9,950 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $16,360–$41,650+ | $32,730–$83,300+ | $6,080–$15,470+ |
| Aluminium slat / pool fencingpool, front, screen, dividingVIC median of fencers’ prices | $350–$510/m | $20,830–$30,350 | $41,650–$60,690 | $7,740–$11,270 |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $26,780–$59,500 | $53,550–$119,000 | $9,950–$22,100 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $29,750–$71,400+ | $59,500–$142,800+ | $11,050–$26,520+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $47,600–$71,400 | $95,200–$142,800 | $17,680–$26,520 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Glenelg fence rules · Read the full rules
A treated pine paling fence is $120–$150/m. Your typical 50/50 share for 119 m is $7,080–$9,160.
Neighbours usually split a sufficient dividing fence 50/50. If you want something better, you pay the difference.
Up to 1.5 m within 3 m of the street (2 m on a declared main road), unless your planning zone sets a lower limit, sometimes 1.2 m.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: Vicmap Property, Vicmap Admin and road casements © Department of Transport and Planning, CC BY 4.0. Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Merino is $7,080–$9,160.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.