Work out your fence
The block size is the median of 1 house lots in Merbein West. The metres are an estimate; change them to match your property.
Merbein West 3505 · Mildura · Victoria
A standard fence costs $110–$160/m installed. Your half of a typical dividing fence is about $19,010–$27,400.
Your 50/50 share · treated pine paling
$19,010–$27,400
342.5 m on a typical block · Wider-area fencers’ prices (7 fencers)
The block size is the median of 1 house lots in Merbein West. The metres are an estimate; change them to match your property.
| Fence | Per metre | Your share | Whole fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontWider-area fencers’ prices (7 fencers) | $110–$160/m | $19,010–$27,400 | $38,020–$54,800 | $780–$1,120 |
| Colorbond steeldividing, frontWider-area fencers’ prices (8 fencers) | $120–$180/m | $20,380–$31,340 | $40,760–$62,680 | $830–$1,280 |
| Chain wire / chain linkdividingNational price | $30–$150/m | $5,140–$25,690 | $10,280–$51,380 | $210–$1,050 |
| PVC / vinylfront, dividingNational price | $40–$90/m | $6,850–$15,410 | $13,700–$30,830 | $280–$630 |
| Timber picketfrontNational price | $60–$350/m | $9,930–$59,940 | $19,870–$119,880 | $410–$2,450 |
| Hardwood paling / lapped and cappeddividing, frontNational price | $80–$220/m | $13,700–$37,680 | $27,400–$75,350 | $560–$1,540 |
| Tubular metalfront, poolNational price | $180–$350/m | $30,830–$59,940 | $61,650–$119,880 | $1,260–$2,450 |
| Semi-frameless glasspool, frontNational price | $200–$280/m | $34,250–$47,090 | $68,500–$94,190 | $1,400–$1,930 |
| Timber slat / horizontal slat screenscreen, front, dividingNational price | $250–$450/m | $42,810–$77,060 | $85,630–$154,130 | $1,750–$3,150 |
| Frameless glasspoolNational price | $280–$700+/m | $47,090–$119,880+ | $94,190–$239,750+ | $1,930–$4,900+ |
| Aluminium slat / pool fencingpool, front, screen, dividingWider-area fencers’ prices (4 fencers) | $310–$590/m | $53,600–$101,380 | $107,200–$202,760 | $2,190–$4,140 |
| Wrought iron / cast ironfrontNational price | $450–$1,000/m | $77,060–$171,250 | $154,130–$342,500 | $3,150–$7,000 |
| Brick, stone or rendered masonryfront, dividingNational price | $500–$1,200+/m | $85,630–$205,500+ | $171,250–$411,000+ | $3,500–$8,400+ |
| Sandstone and timberfrontNational price | $800–$1,200/m | $137,000–$205,500 | $274,000–$411,000 | $5,600–$8,400 |
Rows marked National price use the national range because we have fewer than 2 local fencer prices for that type. See published prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Mildura fence rules · Read the full rules
We’ve checked some of Mildura’s pages, not all. Where there’s no council rule on file we show the Victoria rule. Check with council before you build.
A treated pine paling fence is $110–$160/m. Your typical 50/50 share for 342.5 m is $19,010–$27,400.
Neighbours usually split a sufficient dividing fence 50/50. If you want something better, you pay the difference.
Up to 1.5 m within 3 m of the street (2 m on a declared main road), unless your planning zone sets a lower limit, sometimes 1.2 m.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: Vicmap Property, Vicmap Admin and road casements © Department of Transport and Planning, CC BY 4.0. Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Merbein West is $19,010–$27,400.