Work out your fence
The block size is Median of 1 house lots in Kulwin. The metres are an estimate; change them to match your property.
Kulwin 3490 · Mildura · Victoria
A standard fence costs $110–$160/m installed. Your half of a typical dividing fence is about $7,310–$10,540.
Your 50/50 share · treated pine paling
$7,310–$10,540
131.7 m on a typical block · Wider-area fencers’ prices (7 fencers)
The block size is Median of 1 house lots in Kulwin. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontWider-area fencers’ prices (7 fencers) | $110–$160/m | $7,310–$10,540 | $14,620–$21,070 | $1,640–$2,370 |
| Colorbond steeldividing, frontWider-area fencers’ prices (8 fencers) | $120–$180/m | $7,840–$12,050 | $15,670–$24,100 | $1,760–$2,710 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,980–$9,880 | $3,950–$19,760 | $440–$2,220 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $2,630–$5,930 | $5,270–$11,850 | $590–$1,330 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $3,820–$23,050 | $7,640–$46,090 | $860–$5,180 |
| Hardwood paling / lapped and cappeddividing, frontNational range (few local prices yet) | $80–$220/m | $5,270–$14,490 | $10,540–$28,970 | $1,180–$3,260 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $11,850–$23,050 | $23,710–$46,090 | $2,660–$5,180 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $13,170–$18,110 | $26,340–$36,220 | $2,960–$4,070 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $16,460–$29,630 | $32,930–$59,260 | $3,700–$6,660 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $18,110–$46,090+ | $36,220–$92,190+ | $4,070–$10,360+ |
| Aluminium slat / pool fencingpool, front, screen, dividingWider-area fencers’ prices (4 fencers) | $310–$590/m | $20,610–$38,980 | $41,220–$77,970 | $4,630–$8,760 |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $29,630–$65,850 | $59,260–$131,700 | $6,660–$14,800 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $32,930–$79,020+ | $65,850–$158,040+ | $7,400–$17,760+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $52,680–$79,020 | $105,360–$158,040 | $11,840–$17,760 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Mildura fence rules · Read the full rules
We’ve checked some of Mildura’s pages, not all. Where there’s no council rule on file we show the Victoria rule. Check with council before you build.
A treated pine paling fence is $110–$160/m. Your typical 50/50 share for 131.7 m is $7,310–$10,540.
Neighbours usually split a sufficient dividing fence 50/50. If you want something better, you pay the difference.
Up to 1.5 m within 3 m of the street (2 m on a declared main road), unless your planning zone sets a lower limit, sometimes 1.2 m.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: Vicmap Property, Vicmap Admin and road casements © Department of Transport and Planning, CC BY 4.0. Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Kulwin is $7,310–$10,540.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.