Work out your fence
The block size is Median of 79 house lots in Kenmare. The metres are an estimate; change them to match your property.
Kenmare 3395 · Hindmarsh · Victoria
A standard fence costs $120–$150/m installed. Your half of a typical dividing fence is about $5,770–$7,470.
Your 50/50 share · treated pine paling
$5,770–$7,470
97 m on a typical block · VIC median of fencers’ prices
The block size is Median of 79 house lots in Kenmare. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontVIC median of fencers’ prices | $120–$150/m | $5,770–$7,470 | $11,540–$14,940 | $2,640–$3,420 |
| Colorbond steeldividing, frontVIC median of fencers’ prices | $140–$180/m | $6,640–$8,580 | $13,290–$17,170 | $3,040–$3,930 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,460–$7,280 | $2,910–$14,550 | $670–$3,330 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $1,940–$4,370 | $3,880–$8,730 | $890–$2,000 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $2,810–$16,980 | $5,630–$33,950 | $1,290–$7,770 |
| Hardwood paling / lapped and cappeddividing, frontNational range (few local prices yet) | $80–$220/m | $3,880–$10,670 | $7,760–$21,340 | $1,780–$4,880 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $8,730–$16,980 | $17,460–$33,950 | $4,000–$7,770 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $9,700–$13,340 | $19,400–$26,680 | $4,440–$6,110 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $12,130–$21,830 | $24,250–$43,650 | $5,550–$9,990 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $13,340–$33,950+ | $26,680–$67,900+ | $6,110–$15,540+ |
| Aluminium slat / pool fencingpool, front, screen, dividingVIC median of fencers’ prices | $350–$510/m | $16,980–$24,740 | $33,950–$49,470 | $7,770–$11,320 |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $21,830–$48,500 | $43,650–$97,000 | $9,990–$22,200 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $24,250–$58,200+ | $48,500–$116,400+ | $11,100–$26,640+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $38,800–$58,200 | $77,600–$116,400 | $17,760–$26,640 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Hindmarsh fence rules · Read the full rules
We’ve checked some of Hindmarsh’s pages, not all. Where there’s no council rule on file we show the Victoria rule. Check with council before you build.
A treated pine paling fence is $120–$150/m. Your typical 50/50 share for 97 m is $5,770–$7,470.
Neighbours usually split a sufficient dividing fence 50/50. If you want something better, you pay the difference.
Up to 1.5 m within 3 m of the street (2 m on a declared main road), unless your planning zone sets a lower limit, sometimes 1.2 m.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
The property owner usually pays the full cost. About 99% of local lots have a laneway.
Block-size source: Vicmap Property, Vicmap Admin and road casements © Department of Transport and Planning, CC BY 4.0. Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Kenmare is $5,770–$7,470.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.