Work out your fence
The block size is Median of 7 house lots in Colbinabbin. The metres are an estimate; change them to match your property.
Colbinabbin 3559 · Campaspe · Victoria
A standard fence costs $110–$160/m installed. Your half of a typical dividing fence is about $6,530–$9,410.
Your 50/50 share · treated pine paling
$6,530–$9,410
117.6 m on a typical block · Wider-area fencers’ prices (7 fencers)
The block size is Median of 7 house lots in Colbinabbin. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontWider-area fencers’ prices (7 fencers) | $110–$160/m | $6,530–$9,410 | $13,050–$18,820 | $2,510–$3,620 |
| Colorbond steeldividing, frontWider-area fencers’ prices (8 fencers) | $120–$180/m | $7,000–$10,760 | $13,990–$21,520 | $2,690–$4,140 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,760–$8,820 | $3,530–$17,640 | $680–$3,390 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $2,350–$5,290 | $4,700–$10,580 | $900–$2,030 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $3,410–$20,580 | $6,820–$41,160 | $1,310–$7,910 |
| Hardwood paling / lapped and cappeddividing, frontNational range (few local prices yet) | $80–$220/m | $4,700–$12,940 | $9,410–$25,870 | $1,810–$4,970 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $10,580–$20,580 | $21,170–$41,160 | $4,070–$7,910 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $11,760–$16,170 | $23,520–$32,340 | $4,520–$6,220 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $14,700–$26,460 | $29,400–$52,920 | $5,650–$10,170 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $16,170–$41,160+ | $32,340–$82,320+ | $6,220–$15,820+ |
| Aluminium slat / pool fencingpool, front, screen, dividingWider-area fencers’ prices (4 fencers) | $310–$590/m | $18,400–$34,810 | $36,810–$69,620 | $7,070–$13,380 |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $26,460–$58,800 | $52,920–$117,600 | $10,170–$22,600 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $29,400–$70,560+ | $58,800–$141,120+ | $11,300–$27,120+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $47,040–$70,560 | $94,080–$141,120 | $18,080–$27,120 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Campaspe fence rules · Read the full rules
We’ve checked some of Campaspe’s pages, not all. Where there’s no council rule on file we show the Victoria rule. Check with council before you build.
A treated pine paling fence is $110–$160/m. Your typical 50/50 share for 117.6 m is $6,530–$9,410.
Neighbours usually split a sufficient dividing fence 50/50. If you want something better, you pay the difference.
Up to 1.5 m within 3 m of the street (2 m on a declared main road), unless your planning zone sets a lower limit, sometimes 1.2 m.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
The property owner usually pays the full cost. About 29% of local lots have a laneway.
Block-size source: Vicmap Property, Vicmap Admin and road casements © Department of Transport and Planning, CC BY 4.0. Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Colbinabbin is $6,530–$9,410.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.