Work out your fence
The block size is Median of 1 house lots in Burkes Flat. The metres are an estimate; change them to match your property.
Burkes Flat 3475 · Loddon · Victoria
A standard fence costs $120–$150/m installed. Your half of a typical dividing fence is about $3,340–$4,330.
Your 50/50 share · treated pine paling
$3,340–$4,330
56.2 m on a typical block · VIC median of fencers’ prices
The block size is Median of 1 house lots in Burkes Flat. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontVIC median of fencers’ prices | $120–$150/m | $3,340–$4,330 | $6,690–$8,650 | $1,990–$2,570 |
| Colorbond steeldividing, frontVIC median of fencers’ prices | $140–$180/m | $3,850–$4,970 | $7,700–$9,950 | $2,290–$2,960 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $840–$4,220 | $1,690–$8,430 | $500–$2,510 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $1,120–$2,530 | $2,250–$5,060 | $670–$1,500 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $1,630–$9,840 | $3,260–$19,670 | $970–$5,850 |
| Hardwood paling / lapped and cappeddividing, frontNational range (few local prices yet) | $80–$220/m | $2,250–$6,180 | $4,500–$12,360 | $1,340–$3,670 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $5,060–$9,840 | $10,120–$19,670 | $3,010–$5,850 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $5,620–$7,730 | $11,240–$15,460 | $3,340–$4,590 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $7,030–$12,650 | $14,050–$25,290 | $4,180–$7,520 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $7,730–$19,670+ | $15,460–$39,340+ | $4,590–$11,690+ |
| Aluminium slat / pool fencingpool, front, screen, dividingVIC median of fencers’ prices | $350–$510/m | $9,840–$14,330 | $19,670–$28,660 | $5,850–$8,520 |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $12,650–$28,100 | $25,290–$56,200 | $7,520–$16,700 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $14,050–$33,720+ | $28,100–$67,440+ | $8,350–$20,040+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $22,480–$33,720 | $44,960–$67,440 | $13,360–$20,040 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Loddon fence rules · Read the full rules
A treated pine paling fence is $120–$150/m. Your typical 50/50 share for 56.2 m is $3,340–$4,330.
Neighbours usually split a sufficient dividing fence 50/50. If you want something better, you pay the difference.
A front fence over 1.5 m needs a building permit, and so does one over 1 m within 9 m of a street intersection.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: Vicmap Property, Vicmap Admin and road casements © Department of Transport and Planning, CC BY 4.0. Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Burkes Flat is $3,340–$4,330.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.