Work out your fence
The block size is Median of 14 house lots in Buckland. The metres are an estimate; change them to match your property.
Buckland 3740 · Alpine · Victoria
A standard fence costs $120–$150/m installed. Your half of a typical dividing fence is about $5,590–$7,240.
Your 50/50 share · treated pine paling
$5,590–$7,240
94 m on a typical block · VIC median of fencers’ prices
The block size is Median of 14 house lots in Buckland. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontVIC median of fencers’ prices | $120–$150/m | $5,590–$7,240 | $11,190–$14,480 | $2,440–$3,160 |
| Colorbond steeldividing, frontVIC median of fencers’ prices | $140–$180/m | $6,440–$8,320 | $12,880–$16,640 | $2,810–$3,630 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,410–$7,050 | $2,820–$14,100 | $620–$3,080 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $1,880–$4,230 | $3,760–$8,460 | $820–$1,850 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $2,730–$16,450 | $5,450–$32,900 | $1,190–$7,180 |
| Hardwood paling / lapped and cappeddividing, frontNational range (few local prices yet) | $80–$220/m | $3,760–$10,340 | $7,520–$20,680 | $1,640–$4,510 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $8,460–$16,450 | $16,920–$32,900 | $3,690–$7,180 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $9,400–$12,930 | $18,800–$25,850 | $4,100–$5,640 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $11,750–$21,150 | $23,500–$42,300 | $5,130–$9,230 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $12,930–$32,900+ | $25,850–$65,800+ | $5,640–$14,350+ |
| Aluminium slat / pool fencingpool, front, screen, dividingVIC median of fencers’ prices | $350–$510/m | $16,450–$23,970 | $32,900–$47,940 | $7,180–$10,460 |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $21,150–$47,000 | $42,300–$94,000 | $9,230–$20,500 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $23,500–$56,400+ | $47,000–$112,800+ | $10,250–$24,600+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $37,600–$56,400 | $75,200–$112,800 | $16,400–$24,600 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Alpine fence rules · Read the full rules
We’ve checked some of Alpine’s pages, not all. Where there’s no council rule on file we show the Victoria rule. Check with council before you build.
A treated pine paling fence is $120–$150/m. Your typical 50/50 share for 94 m is $5,590–$7,240.
Neighbours usually split a sufficient dividing fence 50/50. If you want something better, you pay the difference.
Up to 1.5 m within 3 m of the street (2 m on a declared main road), unless your planning zone sets a lower limit, sometimes 1.2 m.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: Vicmap Property, Vicmap Admin and road casements © Department of Transport and Planning, CC BY 4.0. Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Buckland is $5,590–$7,240.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.