Work out your fence
The block size is Median of 897 house lots in Bonshaw. The metres are an estimate; change them to match your property.
Bonshaw 3352 · Ballarat · Victoria
A standard fence costs $110–$160/m installed. Your half of a typical dividing fence is about $4,220–$6,080.
Your 50/50 share · treated pine paling
$4,220–$6,080
76 m on a typical block · Wider-area fencers’ prices (7 fencers)
The block size is Median of 897 house lots in Bonshaw. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontWider-area fencers’ prices (7 fencers) | $110–$160/m | $4,220–$6,080 | $8,440–$12,160 | $1,780–$2,560 |
| Colorbond steeldividing, frontWider-area fencers’ prices (8 fencers) | $120–$180/m | $4,520–$6,950 | $9,040–$13,910 | $1,900–$2,930 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,140–$5,700 | $2,280–$11,400 | $480–$2,400 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $1,520–$3,420 | $3,040–$6,840 | $640–$1,440 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $2,200–$13,300 | $4,410–$26,600 | $930–$5,600 |
| Hardwood paling / lapped and cappeddividing, frontNational range (few local prices yet) | $80–$220/m | $3,040–$8,360 | $6,080–$16,720 | $1,280–$3,520 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $6,840–$13,300 | $13,680–$26,600 | $2,880–$5,600 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $7,600–$10,450 | $15,200–$20,900 | $3,200–$4,400 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $9,500–$17,100 | $19,000–$34,200 | $4,000–$7,200 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $10,450–$26,600+ | $20,900–$53,200+ | $4,400–$11,200+ |
| Aluminium slat / pool fencingpool, front, screen, dividingWider-area fencers’ prices (4 fencers) | $310–$590/m | $11,890–$22,500 | $23,790–$44,990 | $5,010–$9,470 |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $17,100–$38,000 | $34,200–$76,000 | $7,200–$16,000 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $19,000–$45,600+ | $38,000–$91,200+ | $8,000–$19,200+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $30,400–$45,600 | $60,800–$91,200 | $12,800–$19,200 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Ballarat fence rules · Read the full rules
We’ve checked some of Ballarat’s pages, not all. Where there’s no council rule on file we show the Victoria rule. Check with council before you build.
A treated pine paling fence is $110–$160/m. Your typical 50/50 share for 76 m is $4,220–$6,080.
Neighbours usually split a sufficient dividing fence 50/50. If you want something better, you pay the difference.
Up to 1.5 m within 3 m of the street (2 m on a declared main road), unless your planning zone sets a lower limit, sometimes 1.2 m.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: Vicmap Property, Vicmap Admin and road casements © Department of Transport and Planning, CC BY 4.0. Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Bonshaw is $4,220–$6,080.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.