Work out your fence
The block size is Median of 81 house lots in Bolwarra. The metres are an estimate; change them to match your property.
Bolwarra 3305 · Glenelg · Victoria
A standard fence costs $120–$150/m installed. Your half of a typical dividing fence is about $5,880–$7,610.
Your 50/50 share · treated pine paling
$5,880–$7,610
98.8 m on a typical block · VIC median of fencers’ prices
The block size is Median of 81 house lots in Bolwarra. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontVIC median of fencers’ prices | $120–$150/m | $5,880–$7,610 | $11,760–$15,220 | $2,420–$3,130 |
| Colorbond steeldividing, frontVIC median of fencers’ prices | $140–$180/m | $6,770–$8,740 | $13,540–$17,490 | $2,780–$3,590 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,480–$7,410 | $2,960–$14,820 | $610–$3,050 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $1,980–$4,450 | $3,950–$8,890 | $810–$1,830 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $2,870–$17,290 | $5,730–$34,580 | $1,180–$7,110 |
| Hardwood paling / lapped and cappeddividing, frontNational range (few local prices yet) | $80–$220/m | $3,950–$10,870 | $7,900–$21,740 | $1,620–$4,470 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $8,890–$17,290 | $17,780–$34,580 | $3,650–$7,110 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $9,880–$13,590 | $19,760–$27,170 | $4,060–$5,580 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $12,350–$22,230 | $24,700–$44,460 | $5,080–$9,140 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $13,590–$34,580+ | $27,170–$69,160+ | $5,580–$14,210+ |
| Aluminium slat / pool fencingpool, front, screen, dividingVIC median of fencers’ prices | $350–$510/m | $17,290–$25,190 | $34,580–$50,390 | $7,110–$10,350 |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $22,230–$49,400 | $44,460–$98,800 | $9,140–$20,300 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $24,700–$59,280+ | $49,400–$118,560+ | $10,150–$24,360+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $39,520–$59,280 | $79,040–$118,560 | $16,240–$24,360 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Glenelg fence rules · Read the full rules
A treated pine paling fence is $120–$150/m. Your typical 50/50 share for 98.8 m is $5,880–$7,610.
Neighbours usually split a sufficient dividing fence 50/50. If you want something better, you pay the difference.
Up to 1.5 m within 3 m of the street (2 m on a declared main road), unless your planning zone sets a lower limit, sometimes 1.2 m.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: Vicmap Property, Vicmap Admin and road casements © Department of Transport and Planning, CC BY 4.0. Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Bolwarra is $5,880–$7,610.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.