Work out your fence
The block size is Median of 296 house lots in Birchip. The metres are an estimate; change them to match your property.
Birchip 3483 · Buloke · Victoria
A standard fence costs $120–$150/m installed. Your half of a typical dividing fence is about $6,500–$8,410.
Your 50/50 share · treated pine paling
$6,500–$8,410
109.2 m on a typical block · VIC median of fencers’ prices
The block size is Median of 296 house lots in Birchip. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontVIC median of fencers’ prices | $120–$150/m | $6,500–$8,410 | $12,990–$16,820 | $2,510–$3,250 |
| Colorbond steeldividing, frontVIC median of fencers’ prices | $140–$180/m | $7,480–$9,660 | $14,960–$19,330 | $2,890–$3,730 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,640–$8,190 | $3,280–$16,380 | $630–$3,170 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $2,180–$4,910 | $4,370–$9,830 | $840–$1,900 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $3,170–$19,110 | $6,330–$38,220 | $1,220–$7,390 |
| Hardwood paling / lapped and cappeddividing, frontNational range (few local prices yet) | $80–$220/m | $4,370–$12,010 | $8,740–$24,020 | $1,690–$4,640 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $9,830–$19,110 | $19,660–$38,220 | $3,800–$7,390 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $10,920–$15,020 | $21,840–$30,030 | $4,220–$5,800 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $13,650–$24,570 | $27,300–$49,140 | $5,280–$9,500 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $15,020–$38,220+ | $30,030–$76,440+ | $5,800–$14,770+ |
| Aluminium slat / pool fencingpool, front, screen, dividingVIC median of fencers’ prices | $350–$510/m | $19,110–$27,850 | $38,220–$55,690 | $7,390–$10,760 |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $24,570–$54,600 | $49,140–$109,200 | $9,500–$21,100 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $27,300–$65,520+ | $54,600–$131,040+ | $10,550–$25,320+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $43,680–$65,520 | $87,360–$131,040 | $16,880–$25,320 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Buloke fence rules · Read the full rules
We’ve checked some of Buloke’s pages, not all. Where there’s no council rule on file we show the Victoria rule. Check with council before you build.
A treated pine paling fence is $120–$150/m. Your typical 50/50 share for 109.2 m is $6,500–$8,410.
Neighbours usually split a sufficient dividing fence 50/50. If you want something better, you pay the difference.
Up to 1.5 m within 3 m of the street (2 m on a declared main road), unless your planning zone sets a lower limit, sometimes 1.2 m.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: Vicmap Property, Vicmap Admin and road casements © Department of Transport and Planning, CC BY 4.0. Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Birchip is $6,500–$8,410.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.