Work out your fence
The block size is Median of 2 house lots in Barwidgee. The metres are an estimate; change them to match your property.
Barwidgee 3737 · Alpine · Victoria
A standard fence costs $120–$150/m installed. Your half of a typical dividing fence is about $6,060–$7,840.
Your 50/50 share · treated pine paling
$6,060–$7,840
101.8 m on a typical block · VIC median of fencers’ prices
The block size is Median of 2 house lots in Barwidgee. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontVIC median of fencers’ prices | $120–$150/m | $6,060–$7,840 | $12,110–$15,680 | $1,550–$2,000 |
| Colorbond steeldividing, frontVIC median of fencers’ prices | $140–$180/m | $6,970–$9,010 | $13,950–$18,020 | $1,780–$2,300 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,530–$7,640 | $3,050–$15,270 | $390–$1,950 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $2,040–$4,580 | $4,070–$9,160 | $520–$1,170 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $2,950–$17,820 | $5,900–$35,630 | $750–$4,550 |
| Hardwood paling / lapped and cappeddividing, frontNational range (few local prices yet) | $80–$220/m | $4,070–$11,200 | $8,140–$22,400 | $1,040–$2,860 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $9,160–$17,820 | $18,320–$35,630 | $2,340–$4,550 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $10,180–$14,000 | $20,360–$28,000 | $2,600–$3,580 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $12,730–$22,910 | $25,450–$45,810 | $3,250–$5,850 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $14,000–$35,630+ | $28,000–$71,260+ | $3,580–$9,100+ |
| Aluminium slat / pool fencingpool, front, screen, dividingVIC median of fencers’ prices | $350–$510/m | $17,820–$25,960 | $35,630–$51,920 | $4,550–$6,630 |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $22,910–$50,900 | $45,810–$101,800 | $5,850–$13,000 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $25,450–$61,080+ | $50,900–$122,160+ | $6,500–$15,600+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $40,720–$61,080 | $81,440–$122,160 | $10,400–$15,600 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Alpine fence rules · Read the full rules
We’ve checked some of Alpine’s pages, not all. Where there’s no council rule on file we show the Victoria rule. Check with council before you build.
A treated pine paling fence is $120–$150/m. Your typical 50/50 share for 101.8 m is $6,060–$7,840.
Neighbours usually split a sufficient dividing fence 50/50. If you want something better, you pay the difference.
Up to 1.5 m within 3 m of the street (2 m on a declared main road), unless your planning zone sets a lower limit, sometimes 1.2 m.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: Vicmap Property, Vicmap Admin and road casements © Department of Transport and Planning, CC BY 4.0. Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Barwidgee is $6,060–$7,840.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.