Work out your fence
The block size is the median of 88 house lots in Arthurs Seat. The metres are an estimate; change them to match your property.
Arthurs Seat 3936 · Mornington Peninsula · Victoria
A standard fence costs $110–$160/m installed. Your half of a typical dividing fence is about $6,370–$9,180.
Your 50/50 share · treated pine paling
$6,370–$9,180
114.7 m on a typical block · Wider-area fencers’ prices (7 fencers)
The block size is the median of 88 house lots in Arthurs Seat. The metres are an estimate; change them to match your property.
| Fence | Per metre | Your share | Whole fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontWider-area fencers’ prices (7 fencers) | $110–$160/m | $6,370–$9,180 | $12,730–$18,350 | $2,440–$3,520 |
| Colorbond steeldividing, frontWider-area fencers’ prices (8 fencers) | $120–$180/m | $6,820–$10,500 | $13,650–$20,990 | $2,620–$4,030 |
| Chain wire / chain linkdividingNational price | $30–$150/m | $1,720–$8,600 | $3,440–$17,210 | $660–$3,300 |
| PVC / vinylfront, dividingNational price | $40–$90/m | $2,290–$5,160 | $4,590–$10,320 | $880–$1,980 |
| Timber picketfrontNational price | $60–$350/m | $3,330–$20,070 | $6,650–$40,150 | $1,280–$7,700 |
| Hardwood paling / lapped and cappeddividing, frontNational price | $80–$220/m | $4,590–$12,620 | $9,180–$25,230 | $1,760–$4,840 |
| Tubular metalfront, poolNational price | $180–$350/m | $10,320–$20,070 | $20,650–$40,150 | $3,960–$7,700 |
| Semi-frameless glasspool, frontNational price | $200–$280/m | $11,470–$15,770 | $22,940–$31,540 | $4,400–$6,050 |
| Timber slat / horizontal slat screenscreen, front, dividingNational price | $250–$450/m | $14,340–$25,810 | $28,680–$51,620 | $5,500–$9,900 |
| Frameless glasspoolNational price | $280–$700+/m | $15,770–$40,150+ | $31,540–$80,290+ | $6,050–$15,400+ |
| Aluminium slat / pool fencingpool, front, screen, dividingWider-area fencers’ prices (4 fencers) | $310–$590/m | $17,950–$33,950 | $35,900–$67,900 | $6,890–$13,020 |
| Wrought iron / cast ironfrontNational price | $450–$1,000/m | $25,810–$57,350 | $51,620–$114,700 | $9,900–$22,000 |
| Brick, stone or rendered masonryfront, dividingNational price | $500–$1,200+/m | $28,680–$68,820+ | $57,350–$137,640+ | $11,000–$26,400+ |
| Sandstone and timberfrontNational price | $800–$1,200/m | $45,880–$68,820 | $91,760–$137,640 | $17,600–$26,400 |
Rows marked National price use the national range because we have fewer than 2 local fencer prices for that type. See published prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Mornington Peninsula fence rules · Read the full rules
A treated pine paling fence is $110–$160/m. Your typical 50/50 share for 114.7 m is $6,370–$9,180.
Neighbours usually split a sufficient dividing fence 50/50. If you want something better, you pay the difference.
A building permit is needed for a front fence over 1.5 m, or a masonry front fence over 1.2 m.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: Vicmap Property, Vicmap Admin and road casements © Department of Transport and Planning, CC BY 4.0. Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Arthurs Seat is $6,370–$9,180.