Work out your fence
The block size is Median of 1 house lots in Targa. The metres are an estimate; change them to match your property.
Targa 7259 · Launceston · Tasmania
A standard fence costs $60–$190/m installed. Your half of a typical dividing fence is about $2,790–$9,150.
Your 50/50 share · treated pine paling
$2,790–$9,150
96.3 m on a typical block · National range (few local prices yet)
The block size is Median of 1 house lots in Targa. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNational range (few local prices yet) | $60–$190/m | $2,790–$9,150 | $5,590–$18,300 | $1,020–$3,330 |
| Colorbond steeldividing, frontNational range (few local prices yet) | $80–$260/m | $3,850–$12,520 | $7,700–$25,040 | $1,400–$4,550 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,440–$7,220 | $2,890–$14,450 | $530–$2,630 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $1,930–$4,330 | $3,850–$8,670 | $700–$1,580 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $2,790–$16,850 | $5,590–$33,710 | $1,020–$6,130 |
| Hardwood paling / lapped and cappeddividing, frontNational range (few local prices yet) | $80–$220/m | $3,850–$10,590 | $7,700–$21,190 | $1,400–$3,850 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $3,850–$19,260 | $7,700–$38,520 | $1,400–$7,000 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $8,670–$16,850 | $17,330–$33,710 | $3,150–$6,130 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $9,630–$13,240 | $19,260–$26,480 | $3,500–$4,810 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $12,040–$21,670 | $24,080–$43,340 | $4,380–$7,880 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $13,240–$33,710+ | $26,480–$67,410+ | $4,810–$12,250+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $21,670–$48,150 | $43,340–$96,300 | $7,880–$17,500 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $24,080–$57,780+ | $48,150–$115,560+ | $8,750–$21,000+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $38,520–$57,780 | $77,040–$115,560 | $14,000–$21,000 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Launceston fence rules · Read the full rules
We’ve checked some of Launceston’s pages, not all. Where there’s no council rule on file we show the Tasmania rule. Check with council before you build.
A treated pine paling fence is $60–$190/m. Your typical 50/50 share for 96.3 m is $2,790–$9,150.
Talk to your neighbour first, then serve a notice using the Boundary Fences Regulations forms. Without an agreement your neighbour can't be expected to pay. Council doesn't step into disputes.
Within 4.5 m of the street: solid up to 1.2 m, or up to 1.8 m if the part above 1.2 m is at least 30% see-through.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
The property owner usually pays the full cost. About 100% of local lots have a laneway.
Block-size source: Cadastral Parcels, Localities and Local Government Areas from the LIST © State of Tasmania (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Targa is $2,790–$9,150.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.