Work out your fence
The block size is the median of 295 house lots in Swansea. The metres are an estimate; change them to match your property.
Swansea 7190 · Glamorgan-Spring Bay · Tasmania
A standard fence costs $60–$190/m installed. Your half of a typical dividing fence is about $2,870–$9,400.
Your 50/50 share · treated pine paling
$2,870–$9,400
98.9 m on a typical block · National price
The block size is the median of 295 house lots in Swansea. The metres are an estimate; change them to match your property.
| Fence | Per metre | Your share | Whole fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNational price | $60–$190/m | $2,870–$9,400 | $5,740–$18,790 | $1,100–$3,610 |
| Colorbond steeldividing, frontNational price | $80–$260/m | $3,960–$12,860 | $7,910–$25,710 | $1,520–$4,940 |
| Chain wire / chain linkdividingNational price | $30–$150/m | $1,480–$7,420 | $2,970–$14,840 | $570–$2,850 |
| PVC / vinylfront, dividingNational price | $40–$90/m | $1,980–$4,450 | $3,960–$8,900 | $760–$1,710 |
| Timber picketfrontNational price | $60–$350/m | $2,870–$17,310 | $5,740–$34,620 | $1,100–$6,650 |
| Hardwood paling / lapped and cappeddividing, frontNational price | $80–$220/m | $3,960–$10,880 | $7,910–$21,760 | $1,520–$4,180 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational price | $80–$400/m | $3,960–$19,780 | $7,910–$39,560 | $1,520–$7,600 |
| Tubular metalfront, poolNational price | $180–$350/m | $8,900–$17,310 | $17,800–$34,620 | $3,420–$6,650 |
| Semi-frameless glasspool, frontNational price | $200–$280/m | $9,890–$13,600 | $19,780–$27,200 | $3,800–$5,230 |
| Timber slat / horizontal slat screenscreen, front, dividingNational price | $250–$450/m | $12,360–$22,250 | $24,730–$44,510 | $4,750–$8,550 |
| Frameless glasspoolNational price | $280–$700+/m | $13,600–$34,620+ | $27,200–$69,230+ | $5,230–$13,300+ |
| Wrought iron / cast ironfrontNational price | $450–$1,000/m | $22,250–$49,450 | $44,510–$98,900 | $8,550–$19,000 |
| Brick, stone or rendered masonryfront, dividingNational price | $500–$1,200+/m | $24,730–$59,340+ | $49,450–$118,680+ | $9,500–$22,800+ |
| Sandstone and timberfrontNational price | $800–$1,200/m | $39,560–$59,340 | $79,120–$118,680 | $15,200–$22,800 |
Rows marked National price use the national range because we have fewer than 2 local fencer prices for that type. See published prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Glamorgan-Spring Bay fence rules · Read the full rules
We’ve checked some of Glamorgan-Spring Bay’s pages, not all. Where there’s no council rule on file we show the Tasmania rule. Check with council before you build.
A treated pine paling fence is $60–$190/m. Your typical 50/50 share for 98.9 m is $2,870–$9,400.
Neighbours generally split a sufficient boundary fence 50/50, and share repairs.
Within 4.5 m of the street: solid up to 1.2 m, or up to 1.8 m if the part above 1.2 m is at least 30% see-through.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: Cadastral Parcels, Localities and Local Government Areas from the LIST © State of Tasmania (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Swansea is $2,870–$9,400.