Work out your fence
The block size is the median of 16 house lots in Pontville. The metres are an estimate; change them to match your property.
Pontville 7030 · Brighton · Tasmania
A standard fence costs $60–$190/m installed. Your half of a typical dividing fence is about $2,730–$8,940.
Your 50/50 share · treated pine paling
$2,730–$8,940
94.1 m on a typical block · National price
The block size is the median of 16 house lots in Pontville. The metres are an estimate; change them to match your property.
| Fence | Per metre | Your share | Whole fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNational price | $60–$190/m | $2,730–$8,940 | $5,460–$17,880 | $1,100–$3,610 |
| Colorbond steeldividing, frontNational price | $80–$260/m | $3,760–$12,230 | $7,530–$24,470 | $1,520–$4,940 |
| Chain wire / chain linkdividingNational price | $30–$150/m | $1,410–$7,060 | $2,820–$14,120 | $570–$2,850 |
| PVC / vinylfront, dividingNational price | $40–$90/m | $1,880–$4,230 | $3,760–$8,470 | $760–$1,710 |
| Timber picketfrontNational price | $60–$350/m | $2,730–$16,470 | $5,460–$32,940 | $1,100–$6,650 |
| Hardwood paling / lapped and cappeddividing, frontNational price | $80–$220/m | $3,760–$10,350 | $7,530–$20,700 | $1,520–$4,180 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational price | $80–$400/m | $3,760–$18,820 | $7,530–$37,640 | $1,520–$7,600 |
| Tubular metalfront, poolNational price | $180–$350/m | $8,470–$16,470 | $16,940–$32,940 | $3,420–$6,650 |
| Semi-frameless glasspool, frontNational price | $200–$280/m | $9,410–$12,940 | $18,820–$25,880 | $3,800–$5,230 |
| Timber slat / horizontal slat screenscreen, front, dividingNational price | $250–$450/m | $11,760–$21,170 | $23,530–$42,350 | $4,750–$8,550 |
| Frameless glasspoolNational price | $280–$700+/m | $12,940–$32,940+ | $25,880–$65,870+ | $5,230–$13,300+ |
| Wrought iron / cast ironfrontNational price | $450–$1,000/m | $21,170–$47,050 | $42,350–$94,100 | $8,550–$19,000 |
| Brick, stone or rendered masonryfront, dividingNational price | $500–$1,200+/m | $23,530–$56,460+ | $47,050–$112,920+ | $9,500–$22,800+ |
| Sandstone and timberfrontNational price | $800–$1,200/m | $37,640–$56,460 | $75,280–$112,920 | $15,200–$22,800 |
Rows marked National price use the national range because we have fewer than 2 local fencer prices for that type. See published prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Brighton fence rules · Read the full rules
We’ve checked some of Brighton’s pages, not all. Where there’s no council rule on file we show the Tasmania rule. Check with council before you build.
A treated pine paling fence is $60–$190/m. Your typical 50/50 share for 94.1 m is $2,730–$8,940.
Neighbours generally split a sufficient boundary fence 50/50, and share repairs.
Within 4.5 m of the street: solid up to 1.2 m, or up to 1.8 m if the part above 1.2 m is at least 30% see-through.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: Cadastral Parcels, Localities and Local Government Areas from the LIST © State of Tasmania (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Pontville is $2,730–$8,940.