Work out your fence
The block size is Median of 498 house lots in Mount Stuart. The metres are an estimate; change them to match your property.
Mount Stuart 7000 · Hobart · Tasmania
A standard fence costs $60–$190/m installed. Your half of a typical dividing fence is about $2,900–$9,500.
Your 50/50 share · treated pine paling
$2,900–$9,500
100 m on a typical block · National range (few local prices yet)
The block size is Median of 498 house lots in Mount Stuart. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNational range (few local prices yet) | $60–$190/m | $2,900–$9,500 | $5,800–$19,000 | $1,030–$3,380 |
| Colorbond steeldividing, frontNational range (few local prices yet) | $80–$260/m | $4,000–$13,000 | $8,000–$26,000 | $1,420–$4,630 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,500–$7,500 | $3,000–$15,000 | $530–$2,670 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $2,000–$4,500 | $4,000–$9,000 | $710–$1,600 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $2,900–$17,500 | $5,800–$35,000 | $1,030–$6,230 |
| Hardwood paling / lapped and cappeddividing, frontNational range (few local prices yet) | $80–$220/m | $4,000–$11,000 | $8,000–$22,000 | $1,420–$3,920 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $4,000–$20,000 | $8,000–$40,000 | $1,420–$7,120 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $9,000–$17,500 | $18,000–$35,000 | $3,200–$6,230 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $10,000–$13,750 | $20,000–$27,500 | $3,560–$4,900 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $12,500–$22,500 | $25,000–$45,000 | $4,450–$8,010 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $13,750–$35,000+ | $27,500–$70,000+ | $4,900–$12,460+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $22,500–$50,000 | $45,000–$100,000 | $8,010–$17,800 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $25,000–$60,000+ | $50,000–$120,000+ | $8,900–$21,360+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $40,000–$60,000 | $80,000–$120,000 | $14,240–$21,360 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Hobart fence rules · Read the full rules
A treated pine paling fence is $60–$190/m. Your typical 50/50 share for 100 m is $2,900–$9,500.
Neighbours generally split a sufficient boundary fence 50/50, and share repairs.
Outside heritage areas, up to 1.8 m if the part above 1.2 m is at least 30% see-through. Heritage-listed properties: check with council.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: Cadastral Parcels, Localities and Local Government Areas from the LIST © State of Tasmania (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Mount Stuart is $2,900–$9,500.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.