Menu

Macquarie Plains 7140 · Derwent Valley · Tasmania

Fence cost in Macquarie Plains 7140

A standard fence costs $60–$190/m installed. Your half of a typical dividing fence is about $2,760–$9,030.

Your 50/50 share · treated pine paling

$2,760–$9,030

95 m on a typical block · National price

$60–$190/mTreated pine paling
$80–$260/mColorbond
$1,710–$18,810Your upgrade to Colorbond
$1,060–$3,480Front paling · you pay all

Typical block for the Greater Hobart area (median of 127 suburbs). No lot data for Macquarie Plains; edit the metres for your block.. Adjust the metres to match your boundary.

Work out your fence

The block size is typical block for the Greater Hobart area (median of 127 suburbs). No lot data for Macquarie Plains; edit the metres for your block.. The metres are an estimate; change them to match your property.

Makes the job harder (optional)

Standard job

$2,760–$9,030

With your extras

Tick any extras

Skip this and the standard figure stands.

Get up to 3 quotes →Free for homeowners. Your fence details go to up to 3 local fencers.

    Fence cost in Macquarie Plains, by type

    FencePer metreYour shareWhole fenceFront fence
    Treated pine palingMost commondividing, frontNational price$60–$190/m$5,510–$18,050$1,060–$3,480
    Colorbond steeldividing, frontNational price$80–$260/m$7,600–$24,700$1,460–$4,760
    Chain wire / chain linkdividingNational price$30–$150/m$2,850–$14,250$550–$2,750
    PVC / vinylfront, dividingNational price$40–$90/m$3,800–$8,550$730–$1,650
    Timber picketfrontNational price$60–$350/m$5,510–$33,250$1,060–$6,410
    Hardwood paling / lapped and cappeddividing, frontNational price$80–$220/m$7,600–$20,900$1,460–$4,030

    Rows marked National price use the national range because we have fewer than 2 local fencer prices for that type. See published prices.

    What makes a fence cost more?

    Old fence removal

    $20–$40/m

    Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).

    Rocky or hard ground

    $20–$50/m

    Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.

    Plinth or sleeper (small level change)

    $10–$30/m

    A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.

    Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.

    Common questions

    How much does a fence cost per metre in Macquarie Plains?

    A treated pine paling fence is $60–$190/m. Your typical 50/50 share for 95 m is $2,760–$9,030.

    Who pays for a dividing fence in Macquarie Plains?

    Neighbours generally split a sufficient boundary fence 50/50, and share repairs.

    How high can a front fence be in Derwent Valley?

    Within 4.5 m of the street: solid up to 1.2 m, or up to 1.8 m if the part above 1.2 m is at least 30% see-through.

    Does removing the old fence cost extra?

    Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.

    NearbyMore estimates

    Nearby suburbs

    Block-size source: Cadastral Parcels, Localities and Local Government Areas from the LIST © State of Tasmania (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.

    Get quotes for your fence

    Your typical 50/50 share in Macquarie Plains is $2,760–$9,030.

    1. Tell us the suburb, fence and length. It takes about 2 minutes.
    2. We send it to up to 3 local fencers. Free for homeowners.
    3. Compare their quotes with the estimate above. You choose who to hire.
    Get up to 3 quotes →