Work out your fence
The block size is the median of 1 house lots in Jetsonville. The metres are an estimate; change them to match your property.
Jetsonville 7260 · Dorset · Tasmania
A standard fence costs $60–$190/m installed. Your half of a typical dividing fence is about $6,070–$19,870.
Your 50/50 share · treated pine paling
$6,070–$19,870
209.2 m on a typical block · National price
The block size is the median of 1 house lots in Jetsonville. The metres are an estimate; change them to match your property.
| Fence | Per metre | Your share | Whole fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNational price | $60–$190/m | $6,070–$19,870 | $12,130–$39,750 | $500–$1,630 |
| Colorbond steeldividing, frontNational price | $80–$260/m | $8,370–$27,200 | $16,740–$54,390 | $690–$2,240 |
| Chain wire / chain linkdividingNational price | $30–$150/m | $3,140–$15,690 | $6,280–$31,380 | $260–$1,290 |
| PVC / vinylfront, dividingNational price | $40–$90/m | $4,180–$9,410 | $8,370–$18,830 | $340–$770 |
| Timber picketfrontNational price | $60–$350/m | $6,070–$36,610 | $12,130–$73,220 | $500–$3,010 |
| Hardwood paling / lapped and cappeddividing, frontNational price | $80–$220/m | $8,370–$23,010 | $16,740–$46,020 | $690–$1,890 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational price | $80–$400/m | $8,370–$41,840 | $16,740–$83,680 | $690–$3,440 |
| Tubular metalfront, poolNational price | $180–$350/m | $18,830–$36,610 | $37,660–$73,220 | $1,550–$3,010 |
| Semi-frameless glasspool, frontNational price | $200–$280/m | $20,920–$28,770 | $41,840–$57,530 | $1,720–$2,370 |
| Timber slat / horizontal slat screenscreen, front, dividingNational price | $250–$450/m | $26,150–$47,070 | $52,300–$94,140 | $2,150–$3,870 |
| Frameless glasspoolNational price | $280–$700+/m | $28,770–$73,220+ | $57,530–$146,440+ | $2,370–$6,020+ |
| Wrought iron / cast ironfrontNational price | $450–$1,000/m | $47,070–$104,600 | $94,140–$209,200 | $3,870–$8,600 |
| Brick, stone or rendered masonryfront, dividingNational price | $500–$1,200+/m | $52,300–$125,520+ | $104,600–$251,040+ | $4,300–$10,320+ |
| Sandstone and timberfrontNational price | $800–$1,200/m | $83,680–$125,520 | $167,360–$251,040 | $6,880–$10,320 |
Rows marked National price use the national range because we have fewer than 2 local fencer prices for that type. See published prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Dorset fence rules · Read the full rules
We’ve checked some of Dorset’s pages, not all. Where there’s no council rule on file we show the Tasmania rule. Check with council before you build.
A treated pine paling fence is $60–$190/m. Your typical 50/50 share for 209.2 m is $6,070–$19,870.
Neighbours generally split a sufficient boundary fence 50/50, and share repairs.
Within 4.5 m of the street: solid up to 1.2 m, or up to 1.8 m if the part above 1.2 m is at least 30% see-through.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: Cadastral Parcels, Localities and Local Government Areas from the LIST © State of Tasmania (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Jetsonville is $6,070–$19,870.