Work out your fence
The block size is Median of 141 house lots in Glebe. The metres are an estimate; change them to match your property.
Glebe 7000 · Hobart · Tasmania
A standard fence costs $60–$190/m installed. Your half of a typical dividing fence is about $2,160–$7,080.
Your 50/50 share · treated pine paling
$2,160–$7,080
74.5 m on a typical block · National range (few local prices yet)
The block size is Median of 141 house lots in Glebe. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNational range (few local prices yet) | $60–$190/m | $2,160–$7,080 | $4,320–$14,160 | $850–$2,790 |
| Colorbond steeldividing, frontNational range (few local prices yet) | $80–$260/m | $2,980–$9,690 | $5,960–$19,370 | $1,180–$3,820 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,120–$5,590 | $2,240–$11,180 | $440–$2,210 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $1,490–$3,350 | $2,980–$6,710 | $590–$1,320 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $2,160–$13,040 | $4,320–$26,080 | $850–$5,150 |
| Hardwood paling / lapped and cappeddividing, frontNational range (few local prices yet) | $80–$220/m | $2,980–$8,200 | $5,960–$16,390 | $1,180–$3,230 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $2,980–$14,900 | $5,960–$29,800 | $1,180–$5,880 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $6,710–$13,040 | $13,410–$26,080 | $2,650–$5,150 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $7,450–$10,240 | $14,900–$20,490 | $2,940–$4,040 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $9,310–$16,760 | $18,630–$33,530 | $3,680–$6,620 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $10,240–$26,080+ | $20,490–$52,150+ | $4,040–$10,290+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $16,760–$37,250 | $33,530–$74,500 | $6,620–$14,700 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $18,630–$44,700+ | $37,250–$89,400+ | $7,350–$17,640+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $29,800–$44,700 | $59,600–$89,400 | $11,760–$17,640 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Hobart fence rules · Read the full rules
A treated pine paling fence is $60–$190/m. Your typical 50/50 share for 74.5 m is $2,160–$7,080.
Neighbours generally split a sufficient boundary fence 50/50, and share repairs.
Outside heritage areas, up to 1.8 m if the part above 1.2 m is at least 30% see-through. Heritage-listed properties: check with council.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: Cadastral Parcels, Localities and Local Government Areas from the LIST © State of Tasmania (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Glebe is $2,160–$7,080.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.