Work out your fence
The block size is the median of 1 house lots in Flowerdale. The metres are an estimate; change them to match your property.
Flowerdale 7325 · Waratah-Wynyard · Tasmania
A standard fence costs $60–$190/m installed. Your half of a typical dividing fence is about $1,960–$6,410.
Your 50/50 share · treated pine paling
$1,960–$6,410
67.5 m on a typical block · National price
The block size is the median of 1 house lots in Flowerdale. The metres are an estimate; change them to match your property.
| Fence | Per metre | Your share | Whole fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNational price | $60–$190/m | $1,960–$6,410 | $3,920–$12,830 | $770–$2,530 |
| Colorbond steeldividing, frontNational price | $80–$260/m | $2,700–$8,780 | $5,400–$17,550 | $1,060–$3,460 |
| Chain wire / chain linkdividingNational price | $30–$150/m | $1,010–$5,060 | $2,030–$10,130 | $400–$2,000 |
| PVC / vinylfront, dividingNational price | $40–$90/m | $1,350–$3,040 | $2,700–$6,080 | $530–$1,200 |
| Timber picketfrontNational price | $60–$350/m | $1,960–$11,810 | $3,920–$23,630 | $770–$4,660 |
| Hardwood paling / lapped and cappeddividing, frontNational price | $80–$220/m | $2,700–$7,430 | $5,400–$14,850 | $1,060–$2,930 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational price | $80–$400/m | $2,700–$13,500 | $5,400–$27,000 | $1,060–$5,320 |
| Tubular metalfront, poolNational price | $180–$350/m | $6,080–$11,810 | $12,150–$23,630 | $2,390–$4,660 |
| Semi-frameless glasspool, frontNational price | $200–$280/m | $6,750–$9,280 | $13,500–$18,560 | $2,660–$3,660 |
| Timber slat / horizontal slat screenscreen, front, dividingNational price | $250–$450/m | $8,440–$15,190 | $16,880–$30,380 | $3,330–$5,990 |
| Frameless glasspoolNational price | $280–$700+/m | $9,280–$23,630+ | $18,560–$47,250+ | $3,660–$9,310+ |
| Wrought iron / cast ironfrontNational price | $450–$1,000/m | $15,190–$33,750 | $30,380–$67,500 | $5,990–$13,300 |
| Brick, stone or rendered masonryfront, dividingNational price | $500–$1,200+/m | $16,880–$40,500+ | $33,750–$81,000+ | $6,650–$15,960+ |
| Sandstone and timberfrontNational price | $800–$1,200/m | $27,000–$40,500 | $54,000–$81,000 | $10,640–$15,960 |
Rows marked National price use the national range because we have fewer than 2 local fencer prices for that type. See published prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Waratah-Wynyard fence rules · Read the full rules
We’ve checked some of Waratah-Wynyard’s pages, not all. Where there’s no council rule on file we show the Tasmania rule. Check with council before you build.
A treated pine paling fence is $60–$190/m. Your typical 50/50 share for 67.5 m is $1,960–$6,410.
Neighbours generally split a sufficient boundary fence 50/50, and share repairs.
Within 4.5 m of the street: solid up to 1.2 m, or up to 1.8 m if the part above 1.2 m is at least 30% see-through.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: Cadastral Parcels, Localities and Local Government Areas from the LIST © State of Tasmania (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Flowerdale is $1,960–$6,410.