Work out your fence
The block size is Median of 47 house lots in Fern Tree. The metres are an estimate; change them to match your property.
Fern Tree 7054 · Hobart · Tasmania
A standard fence costs $60–$190/m installed. Your half of a typical dividing fence is about $3,070–$10,040.
Your 50/50 share · treated pine paling
$3,070–$10,040
105.7 m on a typical block · National range (few local prices yet)
The block size is Median of 47 house lots in Fern Tree. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNational range (few local prices yet) | $60–$190/m | $3,070–$10,040 | $6,130–$20,080 | $1,160–$3,800 |
| Colorbond steeldividing, frontNational range (few local prices yet) | $80–$260/m | $4,230–$13,740 | $8,460–$27,480 | $1,600–$5,200 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,590–$7,930 | $3,170–$15,860 | $600–$3,000 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $2,110–$4,760 | $4,230–$9,510 | $800–$1,800 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $3,070–$18,500 | $6,130–$37,000 | $1,160–$7,000 |
| Hardwood paling / lapped and cappeddividing, frontNational range (few local prices yet) | $80–$220/m | $4,230–$11,630 | $8,460–$23,250 | $1,600–$4,400 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $4,230–$21,140 | $8,460–$42,280 | $1,600–$8,000 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $9,510–$18,500 | $19,030–$37,000 | $3,600–$7,000 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $10,570–$14,530 | $21,140–$29,070 | $4,000–$5,500 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $13,210–$23,780 | $26,430–$47,570 | $5,000–$9,000 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $14,530–$37,000+ | $29,070–$73,990+ | $5,500–$14,000+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $23,780–$52,850 | $47,570–$105,700 | $9,000–$20,000 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $26,430–$63,420+ | $52,850–$126,840+ | $10,000–$24,000+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $42,280–$63,420 | $84,560–$126,840 | $16,000–$24,000 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Hobart fence rules · Read the full rules
A treated pine paling fence is $60–$190/m. Your typical 50/50 share for 105.7 m is $3,070–$10,040.
Neighbours generally split a sufficient boundary fence 50/50, and share repairs.
Outside heritage areas, up to 1.8 m if the part above 1.2 m is at least 30% see-through. Heritage-listed properties: check with council.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: Cadastral Parcels, Localities and Local Government Areas from the LIST © State of Tasmania (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Fern Tree is $3,070–$10,040.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.