Work out your fence
The block size is Median of 116 house lots in Eaglehawk Neck. The metres are an estimate; change them to match your property.
Eaglehawk Neck 7179 · Tasman · Tasmania
A standard fence costs $60–$190/m installed. Your half of a typical dividing fence is about $3,020–$9,880.
Your 50/50 share · treated pine paling
$3,020–$9,880
104 m on a typical block · National range (few local prices yet)
The block size is Median of 116 house lots in Eaglehawk Neck. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNational range (few local prices yet) | $60–$190/m | $3,020–$9,880 | $6,030–$19,760 | $1,110–$3,650 |
| Colorbond steeldividing, frontNational range (few local prices yet) | $80–$260/m | $4,160–$13,520 | $8,320–$27,040 | $1,540–$4,990 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,560–$7,800 | $3,120–$15,600 | $580–$2,880 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $2,080–$4,680 | $4,160–$9,360 | $770–$1,730 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $3,020–$18,200 | $6,030–$36,400 | $1,110–$6,720 |
| Hardwood paling / lapped and cappeddividing, frontNational range (few local prices yet) | $80–$220/m | $4,160–$11,440 | $8,320–$22,880 | $1,540–$4,220 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $4,160–$20,800 | $8,320–$41,600 | $1,540–$7,680 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $9,360–$18,200 | $18,720–$36,400 | $3,460–$6,720 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $10,400–$14,300 | $20,800–$28,600 | $3,840–$5,280 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $13,000–$23,400 | $26,000–$46,800 | $4,800–$8,640 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $14,300–$36,400+ | $28,600–$72,800+ | $5,280–$13,440+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $23,400–$52,000 | $46,800–$104,000 | $8,640–$19,200 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $26,000–$62,400+ | $52,000–$124,800+ | $9,600–$23,040+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $41,600–$62,400 | $83,200–$124,800 | $15,360–$23,040 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Tasman fence rules · Read the full rules
We’ve checked some of Tasman’s pages, not all. Where there’s no council rule on file we show the Tasmania rule. Check with council before you build.
A treated pine paling fence is $60–$190/m. Your typical 50/50 share for 104 m is $3,020–$9,880.
Neighbours generally split a sufficient boundary fence 50/50, and share repairs.
Within 4.5 m of the street: solid up to 1.2 m, or up to 1.8 m if the part above 1.2 m is at least 30% see-through.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: Cadastral Parcels, Localities and Local Government Areas from the LIST © State of Tasmania (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Eaglehawk Neck is $3,020–$9,880.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.