Work out your fence
The block size is the median of 1 house lots in Acacia Hills. The metres are an estimate; change them to match your property.
Acacia Hills 7306 · Kentish · Tasmania
A standard fence costs $60–$190/m installed. Your half of a typical dividing fence is about $4,210–$13,780.
Your 50/50 share · treated pine paling
$4,210–$13,780
145.1 m on a typical block · National price
The block size is the median of 1 house lots in Acacia Hills. The metres are an estimate; change them to match your property.
| Fence | Per metre | Your share | Whole fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNational price | $60–$190/m | $4,210–$13,780 | $8,420–$27,570 | $1,210–$3,950 |
| Colorbond steeldividing, frontNational price | $80–$260/m | $5,800–$18,860 | $11,610–$37,730 | $1,660–$5,410 |
| Chain wire / chain linkdividingNational price | $30–$150/m | $2,180–$10,880 | $4,350–$21,770 | $620–$3,120 |
| PVC / vinylfront, dividingNational price | $40–$90/m | $2,900–$6,530 | $5,800–$13,060 | $830–$1,870 |
| Timber picketfrontNational price | $60–$350/m | $4,210–$25,390 | $8,420–$50,790 | $1,210–$7,280 |
| Hardwood paling / lapped and cappeddividing, frontNational price | $80–$220/m | $5,800–$15,960 | $11,610–$31,920 | $1,660–$4,580 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational price | $80–$400/m | $5,800–$29,020 | $11,610–$58,040 | $1,660–$8,320 |
| Tubular metalfront, poolNational price | $180–$350/m | $13,060–$25,390 | $26,120–$50,790 | $3,740–$7,280 |
| Semi-frameless glasspool, frontNational price | $200–$280/m | $14,510–$19,950 | $29,020–$39,900 | $4,160–$5,720 |
| Timber slat / horizontal slat screenscreen, front, dividingNational price | $250–$450/m | $18,140–$32,650 | $36,280–$65,300 | $5,200–$9,360 |
| Frameless glasspoolNational price | $280–$700+/m | $19,950–$50,790+ | $39,900–$101,570+ | $5,720–$14,560+ |
| Wrought iron / cast ironfrontNational price | $450–$1,000/m | $32,650–$72,550 | $65,300–$145,100 | $9,360–$20,800 |
| Brick, stone or rendered masonryfront, dividingNational price | $500–$1,200+/m | $36,280–$87,060+ | $72,550–$174,120+ | $10,400–$24,960+ |
| Sandstone and timberfrontNational price | $800–$1,200/m | $58,040–$87,060 | $116,080–$174,120 | $16,640–$24,960 |
Rows marked National price use the national range because we have fewer than 2 local fencer prices for that type. See published prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Kentish fence rules · Read the full rules
We’ve checked some of Kentish’s pages, not all. Where there’s no council rule on file we show the Tasmania rule. Check with council before you build.
A treated pine paling fence is $60–$190/m. Your typical 50/50 share for 145.1 m is $4,210–$13,780.
Neighbours generally split a sufficient boundary fence 50/50, and share repairs.
Within 4.5 m of the street: solid up to 1.2 m, or up to 1.8 m if the part above 1.2 m is at least 30% see-through.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: Cadastral Parcels, Localities and Local Government Areas from the LIST © State of Tasmania (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Acacia Hills is $4,210–$13,780.