Work out your fence
The block size is standard block assumption: the typical house lot across 6333 Vic, NSW and Qld suburbs. No open lot data for SA; edit the metres for your block.. The metres are an estimate; change them to match your property.
Sherwood 5267 · Tatiara · South Australia
A standard fence costs $60–$190/m installed. Your half of a typical dividing fence is about $2,820–$9,240.
Your 50/50 share · treated pine paling
$2,820–$9,240
97.3 m on a typical block · National price
Standard block assumption: the typical house lot across 6333 Vic, NSW and Qld suburbs. No open lot data for SA; edit the metres for your block.. Adjust the metres to match your boundary.
The block size is standard block assumption: the typical house lot across 6333 Vic, NSW and Qld suburbs. No open lot data for SA; edit the metres for your block.. The metres are an estimate; change them to match your property.
| Fence | Per metre | Your share | Whole fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNational price | $60–$190/m | $2,820–$9,240 | $5,640–$18,490 | $1,100–$3,590 |
| Colorbond steeldividing, frontNational price | $80–$260/m | $3,890–$12,650 | $7,780–$25,300 | $1,510–$4,910 |
| Chain wire / chain linkdividingNational price | $30–$150/m | $1,460–$7,300 | $2,920–$14,600 | $570–$2,840 |
| PVC / vinylfront, dividingNational price | $40–$90/m | $1,950–$4,380 | $3,890–$8,760 | $760–$1,700 |
| Timber picketfrontNational price | $60–$350/m | $2,820–$17,030 | $5,640–$34,060 | $1,100–$6,610 |
| Hardwood paling / lapped and cappeddividing, frontNational price | $80–$220/m | $3,890–$10,700 | $7,780–$21,410 | $1,510–$4,160 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational price | $80–$400/m | $3,890–$19,460 | $7,780–$38,920 | $1,510–$7,560 |
| Tubular metalfront, poolNational price | $180–$350/m | $8,760–$17,030 | $17,510–$34,060 | $3,400–$6,610 |
| Semi-frameless glasspool, frontNational price | $200–$280/m | $9,730–$13,380 | $19,460–$26,760 | $3,780–$5,200 |
| Timber slat / horizontal slat screenscreen, front, dividingNational price | $250–$450/m | $12,160–$21,890 | $24,330–$43,790 | $4,730–$8,510 |
| Frameless glasspoolNational price | $280–$700+/m | $13,380–$34,060+ | $26,760–$68,110+ | $5,200–$13,230+ |
| Wrought iron / cast ironfrontNational price | $450–$1,000/m | $21,890–$48,650 | $43,790–$97,300 | $8,510–$18,900 |
| Brick, stone or rendered masonryfront, dividingNational price | $500–$1,200+/m | $24,330–$58,380+ | $48,650–$116,760+ | $9,450–$22,680+ |
| Sandstone and timberfrontNational price | $800–$1,200/m | $38,920–$58,380 | $77,840–$116,760 | $15,120–$22,680 |
Rows marked National price use the national range because we have fewer than 2 local fencer prices for that type. See published prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Tatiara fence rules · Read the full rules
We’ve checked some of Tatiara’s pages, not all. Where there’s no council rule on file we show the South Australia rule. Check with council before you build.
A treated pine paling fence is $60–$190/m. Your typical 50/50 share for 97.3 m is $2,820–$9,240.
Neighbours generally share the cost of an adequate dividing fence equally.
There's no separate statewide front fence height. Fences over 1 m within 6 m of a road corner need approval. Check with council.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: Suburbs and Local Government Areas © Government of South Australia, data.sa.gov.au, CC BY 3.0 AU. Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Sherwood is $2,820–$9,240.