Work out your fence
The block size is Median of 162 house lots in Theodore. The metres are an estimate; change them to match your property.
Theodore 4719 · Banana Shire · Queensland
A standard fence costs $140–$150/m installed. Your half of a typical dividing fence is about $7,050–$7,750.
Your 50/50 share · treated pine paling
$7,050–$7,750
100.7 m on a typical block · QLD median of fencers’ prices
The block size is Median of 162 house lots in Theodore. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontQLD median of fencers’ prices | $140–$150/m | $7,050–$7,750 | $14,100–$15,510 | $2,810–$3,100 |
| Colorbond steeldividing, frontQLD median of fencers’ prices | $160–$180/m | $7,850–$9,260 | $15,710–$18,530 | $3,140–$3,700 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,510–$7,550 | $3,020–$15,110 | $600–$3,020 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $2,010–$4,530 | $4,030–$9,060 | $800–$1,810 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $2,920–$17,620 | $5,840–$35,250 | $1,170–$7,040 |
| Hardwood paling / lapped and cappeddividing, frontNational range (few local prices yet) | $80–$220/m | $4,030–$11,080 | $8,060–$22,150 | $1,610–$4,420 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $4,030–$20,140 | $8,060–$40,280 | $1,610–$8,040 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $9,060–$17,620 | $18,130–$35,250 | $3,620–$7,040 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $10,070–$13,850 | $20,140–$27,690 | $4,020–$5,530 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $12,590–$22,660 | $25,180–$45,320 | $5,030–$9,050 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $13,850–$35,250+ | $27,690–$70,490+ | $5,530–$14,070+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $22,660–$50,350 | $45,320–$100,700 | $9,050–$20,100 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $25,180–$60,420+ | $50,350–$120,840+ | $10,050–$24,120+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $40,280–$60,420 | $80,560–$120,840 | $16,080–$24,120 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Banana Shire fence rules · Read the full rules
We’ve checked some of Banana Shire’s pages, not all. Where there’s no council rule on file we show the Queensland rule. Check with council before you build.
A treated pine paling fence is $140–$150/m. Your typical 50/50 share for 100.7 m is $7,050–$7,750.
Neighbours each pay half of a sufficient dividing fence. If you want more than sufficient, you pay the extra.
Queensland has no statewide front fence height. Your council's planning scheme sets it. Check with council.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
The property owner usually pays the full cost. About 46% of local lots have a laneway.
Block-size source: Digital Cadastral Database (Base Parcels), Locality Boundaries and Local Government Areas © State of Queensland (Department of Natural Resources and Mines, Manufacturing and Regional and Rural Development) 2026, CC BY 4.0. Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Theodore is $7,050–$7,750.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.