Work out your fence
The block size is Median of 1 house lots in Yarra. The metres are an estimate; change them to match your property.
Yarra 2580 · Goulburn Mulwaree · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $10,080–$13,620.
Your 50/50 share · treated pine paling
$10,080–$13,620
136.2 m on a typical block · NSW median of fencers’ prices
The block size is Median of 1 house lots in Yarra. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $10,080–$13,620 | $20,160–$27,240 | $3,270–$4,420 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $8,510–$10,760 | $17,030–$21,520 | $2,760–$3,490 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $2,040–$10,220 | $4,090–$20,430 | $660–$3,320 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $2,720–$6,130 | $5,450–$12,260 | $880–$1,990 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $3,950–$23,830 | $7,900–$47,670 | $1,280–$7,740 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $5,450–$27,240 | $10,900–$54,480 | $1,770–$8,840 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $12,260–$23,830 | $24,520–$47,670 | $3,980–$7,740 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $12,530–$21,520 | $25,060–$43,040 | $4,070–$6,980 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $13,620–$18,730 | $27,240–$37,460 | $4,420–$6,080 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $17,030–$30,640 | $34,050–$61,290 | $5,530–$9,950 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $18,730–$47,670+ | $37,460–$95,340+ | $6,080–$15,470+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $30,640–$68,100 | $61,290–$136,200 | $9,950–$22,100 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $34,050–$81,720+ | $68,100–$163,440+ | $11,050–$26,520+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $54,480–$81,720 | $108,960–$163,440 | $17,680–$26,520 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Goulburn Mulwaree fence rules · Read the full rules
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 136.2 m is $10,080–$13,620.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Yarra is $10,080–$13,620.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.