Work out your fence
The block size is Median of 18 house lots in Yambulla. The metres are an estimate; change them to match your property.
Yambulla 2550 · Bega Valley · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $7,810–$10,560.
Your 50/50 share · treated pine paling
$7,810–$10,560
105.6 m on a typical block · NSW median of fencers’ prices
The block size is Median of 18 house lots in Yambulla. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $7,810–$10,560 | $15,630–$21,120 | $3,050–$4,120 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $6,600–$8,340 | $13,200–$16,680 | $2,580–$3,250 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,580–$7,920 | $3,170–$15,840 | $620–$3,090 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $2,110–$4,750 | $4,220–$9,500 | $820–$1,850 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $3,060–$18,480 | $6,120–$36,960 | $1,190–$7,210 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $4,220–$21,120 | $8,450–$42,240 | $1,650–$8,240 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $9,500–$18,480 | $19,010–$36,960 | $3,710–$7,210 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $9,720–$16,680 | $19,430–$33,370 | $3,790–$6,510 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $10,560–$14,520 | $21,120–$29,040 | $4,120–$5,670 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $13,200–$23,760 | $26,400–$47,520 | $5,150–$9,270 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $14,520–$36,960+ | $29,040–$73,920+ | $5,670–$14,420+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $23,760–$52,800 | $47,520–$105,600 | $9,270–$20,600 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $26,400–$63,360+ | $52,800–$126,720+ | $10,300–$24,720+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $42,240–$63,360 | $84,480–$126,720 | $16,480–$24,720 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Bega Valley fence rules · Read the full rules
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 105.6 m is $7,810–$10,560.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
The property owner usually pays the full cost. About 83% of local lots have a laneway.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Yambulla is $7,810–$10,560.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.