Work out your fence
The block size is Median of 1473 house lots in Valentine. The metres are an estimate; change them to match your property.
Valentine 2280 · Lake Macquarie · New South Wales
A standard fence costs $150–$180/m installed. Your half of a typical dividing fence is about $6,800–$8,070.
Your 50/50 share · treated pine paling
$6,800–$8,070
90.7 m on a typical block · Wider-area fencers’ prices (3 fencers)
The block size is Median of 1473 house lots in Valentine. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontWider-area fencers’ prices (3 fencers) | $150–$180/m | $6,800–$8,070 | $13,610–$16,140 | $2,690–$3,190 |
| Colorbond steeldividing, frontWider-area fencers’ prices (3 fencers) | $120–$140/m | $5,350–$6,490 | $10,700–$12,970 | $2,110–$2,560 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,360–$6,800 | $2,720–$13,610 | $540–$2,690 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $1,810–$4,080 | $3,630–$8,160 | $720–$1,610 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $2,630–$15,870 | $5,260–$31,750 | $1,040–$6,260 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $3,630–$18,140 | $7,260–$36,280 | $1,430–$7,160 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $8,160–$15,870 | $16,330–$31,750 | $3,220–$6,260 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $8,340–$14,330 | $16,690–$28,660 | $3,290–$5,660 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $9,070–$12,470 | $18,140–$24,940 | $3,580–$4,920 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $11,340–$20,410 | $22,680–$40,820 | $4,480–$8,050 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $12,470–$31,750+ | $24,940–$63,490+ | $4,920–$12,530+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $20,410–$45,350 | $40,820–$90,700 | $8,050–$17,900 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $22,680–$54,420+ | $45,350–$108,840+ | $8,950–$21,480+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $36,280–$54,420 | $72,560–$108,840 | $14,320–$21,480 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Lake Macquarie fence rules · Read the full rules
We’ve checked some of Lake Macquarie’s pages, not all. Where there’s no council rule on file we show the New South Wales rule. Check with council before you build.
A treated pine paling fence is $150–$180/m. Your typical 50/50 share for 90.7 m is $6,800–$8,070.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Valentine is $6,800–$8,070.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.