Work out your fence
The block size is Median of 2 house lots in Tilbuster. The metres are an estimate; change them to match your property.
Tilbuster 2350 · Armidale Regional · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $6,020–$8,140.
Your 50/50 share · treated pine paling
$6,020–$8,140
81.4 m on a typical block · NSW median of fencers’ prices
The block size is Median of 2 house lots in Tilbuster. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $6,020–$8,140 | $12,050–$16,280 | $2,380–$3,220 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $5,090–$6,430 | $10,180–$12,860 | $2,010–$2,540 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,220–$6,110 | $2,440–$12,210 | $480–$2,420 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $1,630–$3,660 | $3,260–$7,330 | $640–$1,450 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $2,360–$14,250 | $4,720–$28,490 | $930–$5,640 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $3,260–$16,280 | $6,510–$32,560 | $1,290–$6,440 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $7,330–$14,250 | $14,650–$28,490 | $2,900–$5,640 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $7,490–$12,860 | $14,980–$25,720 | $2,960–$5,090 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $8,140–$11,190 | $16,280–$22,390 | $3,220–$4,430 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $10,180–$18,320 | $20,350–$36,630 | $4,030–$7,250 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $11,190–$28,490+ | $22,390–$56,980+ | $4,430–$11,270+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $18,320–$40,700 | $36,630–$81,400 | $7,250–$16,100 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $20,350–$48,840+ | $40,700–$97,680+ | $8,050–$19,320+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $32,560–$48,840 | $65,120–$97,680 | $12,880–$19,320 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Armidale Regional fence rules · Read the full rules
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 81.4 m is $6,020–$8,140.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Front and secondary street fences can be no higher than 1.2 m and must be at least 50% see-through.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Tilbuster is $6,020–$8,140.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.