Work out your fence
The block size is Median of 2 house lots in Thora. The metres are an estimate; change them to match your property.
Thora 2454 · Bellingen · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $3,860–$5,210.
Your 50/50 share · treated pine paling
$3,860–$5,210
52.1 m on a typical block · NSW median of fencers’ prices
The block size is Median of 2 house lots in Thora. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $3,860–$5,210 | $7,710–$10,420 | $3,270–$4,420 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $3,260–$4,120 | $6,510–$8,230 | $2,760–$3,490 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $780–$3,910 | $1,560–$7,820 | $660–$3,320 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $1,040–$2,340 | $2,080–$4,690 | $880–$1,990 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $1,510–$9,120 | $3,020–$18,240 | $1,280–$7,740 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $2,080–$10,420 | $4,170–$20,840 | $1,770–$8,840 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $4,690–$9,120 | $9,380–$18,240 | $3,980–$7,740 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $4,790–$8,230 | $9,590–$16,460 | $4,070–$6,980 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $5,210–$7,160 | $10,420–$14,330 | $4,420–$6,080 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $6,510–$11,720 | $13,030–$23,450 | $5,530–$9,950 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $7,160–$18,240+ | $14,330–$36,470+ | $6,080–$15,470+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $11,720–$26,050 | $23,450–$52,100 | $9,950–$22,100 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $13,030–$31,260+ | $26,050–$62,520+ | $11,050–$26,520+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $20,840–$31,260 | $41,680–$62,520 | $17,680–$26,520 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Bellingen fence rules · Read the full rules
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 52.1 m is $3,860–$5,210.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Thora is $3,860–$5,210.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.