Work out your fence
The block size is the median of 2 house lots in Thalgarrah. The metres are an estimate; change them to match your property.
Thalgarrah 2350 · Armidale Regional · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $3,630–$4,900.
Your 50/50 share · treated pine paling
$3,630–$4,900
49 m on a typical block · NSW median of fencers’ prices
The block size is the median of 2 house lots in Thalgarrah. The metres are an estimate; change them to match your property.
| Fence | Per metre | Your share | Whole fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $3,630–$4,900 | $7,250–$9,800 | $2,920–$3,940 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $3,060–$3,870 | $6,130–$7,740 | $2,460–$3,110 |
| Chain wire / chain linkdividingNational price | $30–$150/m | $740–$3,680 | $1,470–$7,350 | $590–$2,960 |
| PVC / vinylfront, dividingNational price | $40–$90/m | $980–$2,210 | $1,960–$4,410 | $790–$1,770 |
| Timber picketfrontNational price | $60–$350/m | $1,420–$8,580 | $2,840–$17,150 | $1,140–$6,900 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational price | $80–$400/m | $1,960–$9,800 | $3,920–$19,600 | $1,580–$7,880 |
| Tubular metalfront, poolNational price | $180–$350/m | $4,410–$8,580 | $8,820–$17,150 | $3,550–$6,900 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $4,510–$7,740 | $9,020–$15,480 | $3,620–$6,230 |
| Semi-frameless glasspool, frontNational price | $200–$280/m | $4,900–$6,740 | $9,800–$13,480 | $3,940–$5,420 |
| Timber slat / horizontal slat screenscreen, front, dividingNational price | $250–$450/m | $6,130–$11,030 | $12,250–$22,050 | $4,930–$8,870 |
| Frameless glasspoolNational price | $280–$700+/m | $6,740–$17,150+ | $13,480–$34,300+ | $5,420–$13,790+ |
| Wrought iron / cast ironfrontNational price | $450–$1,000/m | $11,030–$24,500 | $22,050–$49,000 | $8,870–$19,700 |
| Brick, stone or rendered masonryfront, dividingNational price | $500–$1,200+/m | $12,250–$29,400+ | $24,500–$58,800+ | $9,850–$23,640+ |
| Sandstone and timberfrontNational price | $800–$1,200/m | $19,600–$29,400 | $39,200–$58,800 | $15,760–$23,640 |
Rows marked National price use the national range because we have fewer than 2 local fencer prices for that type. See published prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Armidale Regional fence rules · Read the full rules
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 49 m is $3,630–$4,900.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Front and secondary street fences can be no higher than 1.2 m and must be at least 50% see-through.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Thalgarrah is $3,630–$4,900.