Work out your fence
The block size is the median of 360 house lots in Roseville Chase. The metres are an estimate; change them to match your property.
Roseville Chase 2069 · Ku-Ring-Gai · New South Wales
A standard fence costs $170–$220/m installed. Your half of a typical dividing fence is about $8,840–$11,520.
Your 50/50 share · treated pine paling
$8,840–$11,520
107.2 m on a typical block · Wider-area fencers’ prices (3 fencers)
The block size is the median of 360 house lots in Roseville Chase. The metres are an estimate; change them to match your property.
| Fence | Per metre | Your share | Whole fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontWider-area fencers’ prices (3 fencers) | $170–$220/m | $8,840–$11,520 | $17,690–$23,050 | $2,760–$3,590 |
| Colorbond steeldividing, frontWider-area fencers’ prices (4 fencers) | $130–$170/m | $6,910–$8,840 | $13,830–$17,690 | $2,150–$2,760 |
| Chain wire / chain linkdividingNational price | $30–$150/m | $1,610–$8,040 | $3,220–$16,080 | $500–$2,510 |
| PVC / vinylfront, dividingNational price | $40–$90/m | $2,140–$4,820 | $4,290–$9,650 | $670–$1,500 |
| Timber picketfrontNational price | $60–$350/m | $3,110–$18,760 | $6,220–$37,520 | $970–$5,850 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational price | $80–$400/m | $4,290–$21,440 | $8,580–$42,880 | $1,340–$6,680 |
| Tubular metalfront, poolNational price | $180–$350/m | $9,650–$18,760 | $19,300–$37,520 | $3,010–$5,850 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $9,860–$16,940 | $19,720–$33,880 | $3,070–$5,280 |
| Semi-frameless glasspool, frontNational price | $200–$280/m | $10,720–$14,740 | $21,440–$29,480 | $3,340–$4,590 |
| Timber slat / horizontal slat screenscreen, front, dividingNational price | $250–$450/m | $13,400–$24,120 | $26,800–$48,240 | $4,180–$7,520 |
| Frameless glasspoolNational price | $280–$700+/m | $14,740–$37,520+ | $29,480–$75,040+ | $4,590–$11,690+ |
| Wrought iron / cast ironfrontNational price | $450–$1,000/m | $24,120–$53,600 | $48,240–$107,200 | $7,520–$16,700 |
| Brick, stone or rendered masonryfront, dividingNational price | $500–$1,200+/m | $26,800–$64,320+ | $53,600–$128,640+ | $8,350–$20,040+ |
| Sandstone and timberfrontNational price | $800–$1,200/m | $42,880–$64,320 | $85,760–$128,640 | $13,360–$20,040 |
Rows marked National price use the national range because we have fewer than 2 local fencer prices for that type. See published prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Ku-Ring-Gai fence rules · Read the full rules
We’ve checked some of Ku-Ring-Gai’s pages, not all. Where there’s no council rule on file we show the New South Wales rule. Check with council before you build.
A treated pine paling fence is $170–$220/m. Your typical 50/50 share for 107.2 m is $8,840–$11,520.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Roseville Chase is $8,840–$11,520.