Work out your fence
The block size is Median of 1 house lots in Purfleet. The metres are an estimate; change them to match your property.
Purfleet 2430 · Mid-Coast · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $5,740–$7,750.
Your 50/50 share · treated pine paling
$5,740–$7,750
77.5 m on a typical block · NSW median of fencers’ prices
The block size is Median of 1 house lots in Purfleet. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $5,740–$7,750 | $11,470–$15,500 | $2,810–$3,800 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $4,840–$6,120 | $9,690–$12,250 | $2,380–$3,000 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,160–$5,810 | $2,330–$11,630 | $570–$2,850 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $1,550–$3,490 | $3,100–$6,980 | $760–$1,710 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $2,250–$13,560 | $4,500–$27,130 | $1,100–$6,650 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $3,100–$15,500 | $6,200–$31,000 | $1,520–$7,600 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $6,980–$13,560 | $13,950–$27,130 | $3,420–$6,650 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $7,130–$12,250 | $14,260–$24,490 | $3,500–$6,000 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $7,750–$10,660 | $15,500–$21,310 | $3,800–$5,230 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $9,690–$17,440 | $19,380–$34,880 | $4,750–$8,550 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $10,660–$27,130+ | $21,310–$54,250+ | $5,230–$13,300+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $17,440–$38,750 | $34,880–$77,500 | $8,550–$19,000 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $19,380–$46,500+ | $38,750–$93,000+ | $9,500–$22,800+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $31,000–$46,500 | $62,000–$93,000 | $15,200–$22,800 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Mid-Coast fence rules · Read the full rules
We’ve checked some of Mid-Coast’s pages, not all. Where there’s no council rule on file we show the New South Wales rule. Check with council before you build.
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 77.5 m is $5,740–$7,750.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Purfleet is $5,740–$7,750.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.