Work out your fence
The block size is the median of 2 house lots in Possum Brush. The metres are an estimate; change them to match your property.
Possum Brush 2430 · Mid-Coast · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $7,070–$9,550.
Your 50/50 share · treated pine paling
$7,070–$9,550
95.5 m on a typical block · NSW median of fencers’ prices
The block size is the median of 2 house lots in Possum Brush. The metres are an estimate; change them to match your property.
| Fence | Per metre | Your share | Whole fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $7,070–$9,550 | $14,130–$19,100 | $2,130–$2,880 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $5,970–$7,540 | $11,940–$15,090 | $1,800–$2,280 |
| Chain wire / chain linkdividingNational price | $30–$150/m | $1,430–$7,160 | $2,870–$14,330 | $430–$2,160 |
| PVC / vinylfront, dividingNational price | $40–$90/m | $1,910–$4,300 | $3,820–$8,600 | $580–$1,300 |
| Timber picketfrontNational price | $60–$350/m | $2,770–$16,710 | $5,540–$33,430 | $840–$5,040 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational price | $80–$400/m | $3,820–$19,100 | $7,640–$38,200 | $1,150–$5,760 |
| Tubular metalfront, poolNational price | $180–$350/m | $8,600–$16,710 | $17,190–$33,430 | $2,590–$5,040 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $8,790–$15,090 | $17,570–$30,180 | $2,650–$4,550 |
| Semi-frameless glasspool, frontNational price | $200–$280/m | $9,550–$13,130 | $19,100–$26,260 | $2,880–$3,960 |
| Timber slat / horizontal slat screenscreen, front, dividingNational price | $250–$450/m | $11,940–$21,490 | $23,880–$42,980 | $3,600–$6,480 |
| Frameless glasspoolNational price | $280–$700+/m | $13,130–$33,430+ | $26,260–$66,850+ | $3,960–$10,080+ |
| Wrought iron / cast ironfrontNational price | $450–$1,000/m | $21,490–$47,750 | $42,980–$95,500 | $6,480–$14,400 |
| Brick, stone or rendered masonryfront, dividingNational price | $500–$1,200+/m | $23,880–$57,300+ | $47,750–$114,600+ | $7,200–$17,280+ |
| Sandstone and timberfrontNational price | $800–$1,200/m | $38,200–$57,300 | $76,400–$114,600 | $11,520–$17,280 |
Rows marked National price use the national range because we have fewer than 2 local fencer prices for that type. See published prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Mid-Coast fence rules · Read the full rules
We’ve checked some of Mid-Coast’s pages, not all. Where there’s no council rule on file we show the New South Wales rule. Check with council before you build.
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 95.5 m is $7,070–$9,550.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Possum Brush is $7,070–$9,550.