Work out your fence
The block size is Median of 105 house lots in Pindimar. The metres are an estimate; change them to match your property.
Pindimar 2324 · Mid-Coast · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $8,210–$11,090.
Your 50/50 share · treated pine paling
$8,210–$11,090
110.9 m on a typical block · NSW median of fencers’ prices
The block size is Median of 105 house lots in Pindimar. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $8,210–$11,090 | $16,410–$22,180 | $2,710–$3,660 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $6,930–$8,760 | $13,860–$17,520 | $2,290–$2,890 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,660–$8,320 | $3,330–$16,640 | $550–$2,750 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $2,220–$4,990 | $4,440–$9,980 | $730–$1,650 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $3,220–$19,410 | $6,430–$38,820 | $1,060–$6,410 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $4,440–$22,180 | $8,870–$44,360 | $1,460–$7,320 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $9,980–$19,410 | $19,960–$38,820 | $3,290–$6,410 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $10,200–$17,520 | $20,410–$35,040 | $3,370–$5,780 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $11,090–$15,250 | $22,180–$30,500 | $3,660–$5,030 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $13,860–$24,950 | $27,730–$49,910 | $4,580–$8,240 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $15,250–$38,820+ | $30,500–$77,630+ | $5,030–$12,810+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $24,950–$55,450 | $49,910–$110,900 | $8,240–$18,300 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $27,730–$66,540+ | $55,450–$133,080+ | $9,150–$21,960+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $44,360–$66,540 | $88,720–$133,080 | $14,640–$21,960 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Mid-Coast fence rules · Read the full rules
We’ve checked some of Mid-Coast’s pages, not all. Where there’s no council rule on file we show the New South Wales rule. Check with council before you build.
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 110.9 m is $8,210–$11,090.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Pindimar is $8,210–$11,090.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.