Work out your fence
The block size is Median of 1 house lots in Pampoolah. The metres are an estimate; change them to match your property.
Pampoolah 2430 · Mid-Coast · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $8,270–$11,170.
Your 50/50 share · treated pine paling
$8,270–$11,170
111.7 m on a typical block · NSW median of fencers’ prices
The block size is Median of 1 house lots in Pampoolah. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $8,270–$11,170 | $16,530–$22,340 | $2,750–$3,720 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $6,980–$8,820 | $13,960–$17,650 | $2,330–$2,940 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,680–$8,380 | $3,350–$16,760 | $560–$2,790 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $2,230–$5,030 | $4,470–$10,050 | $740–$1,670 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $3,240–$19,550 | $6,480–$39,100 | $1,080–$6,510 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $4,470–$22,340 | $8,940–$44,680 | $1,490–$7,440 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $10,050–$19,550 | $20,110–$39,100 | $3,350–$6,510 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $10,280–$17,650 | $20,550–$35,300 | $3,420–$5,880 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $11,170–$15,360 | $22,340–$30,720 | $3,720–$5,120 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $13,960–$25,130 | $27,930–$50,270 | $4,650–$8,370 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $15,360–$39,100+ | $30,720–$78,190+ | $5,120–$13,020+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $25,130–$55,850 | $50,270–$111,700 | $8,370–$18,600 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $27,930–$67,020+ | $55,850–$134,040+ | $9,300–$22,320+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $44,680–$67,020 | $89,360–$134,040 | $14,880–$22,320 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Mid-Coast fence rules · Read the full rules
We’ve checked some of Mid-Coast’s pages, not all. Where there’s no council rule on file we show the New South Wales rule. Check with council before you build.
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 111.7 m is $8,270–$11,170.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Pampoolah is $8,270–$11,170.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.