Work out your fence
The block size is Median of 1 house lots in Myrtle Mountain. The metres are an estimate; change them to match your property.
Myrtle Mountain 2550 · Bega Valley · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $5,220–$7,060.
Your 50/50 share · treated pine paling
$5,220–$7,060
70.6 m on a typical block · NSW median of fencers’ prices
The block size is Median of 1 house lots in Myrtle Mountain. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $5,220–$7,060 | $10,450–$14,120 | $3,400–$4,600 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $4,410–$5,580 | $8,830–$11,150 | $2,880–$3,630 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,060–$5,300 | $2,120–$10,590 | $690–$3,450 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $1,410–$3,180 | $2,820–$6,350 | $920–$2,070 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $2,050–$12,350 | $4,090–$24,710 | $1,330–$8,050 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $2,820–$14,120 | $5,650–$28,240 | $1,840–$9,200 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $6,350–$12,350 | $12,710–$24,710 | $4,140–$8,050 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $6,500–$11,150 | $12,990–$22,310 | $4,230–$7,270 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $7,060–$9,710 | $14,120–$19,420 | $4,600–$6,330 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $8,830–$15,880 | $17,650–$31,770 | $5,750–$10,350 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $9,710–$24,710+ | $19,420–$49,420+ | $6,330–$16,100+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $15,880–$35,300 | $31,770–$70,600 | $10,350–$23,000 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $17,650–$42,360+ | $35,300–$84,720+ | $11,500–$27,600+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $28,240–$42,360 | $56,480–$84,720 | $18,400–$27,600 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Bega Valley fence rules · Read the full rules
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 70.6 m is $5,220–$7,060.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Myrtle Mountain is $5,220–$7,060.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.