Work out your fence
The block size is Median of 1 house lots in Murrah. The metres are an estimate; change them to match your property.
Murrah 2546 · Bega Valley · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $8,080–$10,920.
Your 50/50 share · treated pine paling
$8,080–$10,920
109.2 m on a typical block · NSW median of fencers’ prices
The block size is Median of 1 house lots in Murrah. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $8,080–$10,920 | $16,160–$21,840 | $3,020–$4,080 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $6,830–$8,630 | $13,650–$17,250 | $2,550–$3,220 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,640–$8,190 | $3,280–$16,380 | $610–$3,060 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $2,180–$4,910 | $4,370–$9,830 | $820–$1,840 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $3,170–$19,110 | $6,330–$38,220 | $1,180–$7,140 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $4,370–$21,840 | $8,740–$43,680 | $1,630–$8,160 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $9,830–$19,110 | $19,660–$38,220 | $3,670–$7,140 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $10,050–$17,250 | $20,090–$34,510 | $3,750–$6,450 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $10,920–$15,020 | $21,840–$30,030 | $4,080–$5,610 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $13,650–$24,570 | $27,300–$49,140 | $5,100–$9,180 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $15,020–$38,220+ | $30,030–$76,440+ | $5,610–$14,280+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $24,570–$54,600 | $49,140–$109,200 | $9,180–$20,400 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $27,300–$65,520+ | $54,600–$131,040+ | $10,200–$24,480+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $43,680–$65,520 | $87,360–$131,040 | $16,320–$24,480 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Bega Valley fence rules · Read the full rules
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 109.2 m is $8,080–$10,920.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Murrah is $8,080–$10,920.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.