Work out your fence
The block size is the median of 156 house lots in Mirador. The metres are an estimate; change them to match your property.
Mirador 2548 · Bega Valley · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $8,100–$10,950.
Your 50/50 share · treated pine paling
$8,100–$10,950
109.5 m on a typical block · NSW median of fencers’ prices
The block size is the median of 156 house lots in Mirador. The metres are an estimate; change them to match your property.
| Fence | Per metre | Your share | Whole fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $8,100–$10,950 | $16,210–$21,900 | $3,120–$4,220 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $6,840–$8,650 | $13,690–$17,300 | $2,640–$3,330 |
| Chain wire / chain linkdividingNational price | $30–$150/m | $1,640–$8,210 | $3,290–$16,430 | $630–$3,170 |
| PVC / vinylfront, dividingNational price | $40–$90/m | $2,190–$4,930 | $4,380–$9,860 | $840–$1,900 |
| Timber picketfrontNational price | $60–$350/m | $3,180–$19,160 | $6,350–$38,330 | $1,220–$7,390 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational price | $80–$400/m | $4,380–$21,900 | $8,760–$43,800 | $1,690–$8,440 |
| Tubular metalfront, poolNational price | $180–$350/m | $9,860–$19,160 | $19,710–$38,330 | $3,800–$7,390 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $10,070–$17,300 | $20,150–$34,600 | $3,880–$6,670 |
| Semi-frameless glasspool, frontNational price | $200–$280/m | $10,950–$15,060 | $21,900–$30,110 | $4,220–$5,800 |
| Timber slat / horizontal slat screenscreen, front, dividingNational price | $250–$450/m | $13,690–$24,640 | $27,380–$49,280 | $5,280–$9,500 |
| Frameless glasspoolNational price | $280–$700+/m | $15,060–$38,330+ | $30,110–$76,650+ | $5,800–$14,770+ |
| Wrought iron / cast ironfrontNational price | $450–$1,000/m | $24,640–$54,750 | $49,280–$109,500 | $9,500–$21,100 |
| Brick, stone or rendered masonryfront, dividingNational price | $500–$1,200+/m | $27,380–$65,700+ | $54,750–$131,400+ | $10,550–$25,320+ |
| Sandstone and timberfrontNational price | $800–$1,200/m | $43,800–$65,700 | $87,600–$131,400 | $16,880–$25,320 |
Rows marked National price use the national range because we have fewer than 2 local fencer prices for that type. See published prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Bega Valley fence rules · Read the full rules
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 109.5 m is $8,100–$10,950.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Mirador is $8,100–$10,950.