Work out your fence
The block size is Median of 6 house lots in Megan. The metres are an estimate; change them to match your property.
Megan 2453 · Bellingen · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $9,050–$12,230.
Your 50/50 share · treated pine paling
$9,050–$12,230
122.3 m on a typical block · NSW median of fencers’ prices
The block size is Median of 6 house lots in Megan. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $9,050–$12,230 | $18,100–$24,460 | $2,930–$3,960 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $7,640–$9,660 | $15,290–$19,320 | $2,480–$3,130 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,830–$9,170 | $3,670–$18,350 | $590–$2,970 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $2,450–$5,500 | $4,890–$11,010 | $790–$1,780 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $3,550–$21,400 | $7,090–$42,810 | $1,150–$6,930 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $4,890–$24,460 | $9,780–$48,920 | $1,580–$7,920 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $11,010–$21,400 | $22,010–$42,810 | $3,560–$6,930 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $11,250–$19,320 | $22,500–$38,650 | $3,640–$6,260 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $12,230–$16,820 | $24,460–$33,630 | $3,960–$5,450 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $15,290–$27,520 | $30,580–$55,040 | $4,950–$8,910 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $16,820–$42,810+ | $33,630–$85,610+ | $5,450–$13,860+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $27,520–$61,150 | $55,040–$122,300 | $8,910–$19,800 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $30,580–$73,380+ | $61,150–$146,760+ | $9,900–$23,760+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $48,920–$73,380 | $97,840–$146,760 | $15,840–$23,760 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Bellingen fence rules · Read the full rules
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 122.3 m is $9,050–$12,230.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Megan is $9,050–$12,230.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.