Work out your fence
The block size is Median of 60 house lots in Krambach. The metres are an estimate; change them to match your property.
Krambach 2429 · Mid-Coast · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $8,530–$11,530.
Your 50/50 share · treated pine paling
$8,530–$11,530
115.3 m on a typical block · NSW median of fencers’ prices
The block size is Median of 60 house lots in Krambach. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $8,530–$11,530 | $17,060–$23,060 | $2,930–$3,960 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $7,210–$9,110 | $14,410–$18,220 | $2,480–$3,130 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,730–$8,650 | $3,460–$17,300 | $590–$2,970 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $2,310–$5,190 | $4,610–$10,380 | $790–$1,780 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $3,340–$20,180 | $6,690–$40,360 | $1,150–$6,930 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $4,610–$23,060 | $9,220–$46,120 | $1,580–$7,920 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $10,380–$20,180 | $20,750–$40,360 | $3,560–$6,930 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $10,610–$18,220 | $21,220–$36,430 | $3,640–$6,260 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $11,530–$15,850 | $23,060–$31,710 | $3,960–$5,450 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $14,410–$25,940 | $28,830–$51,890 | $4,950–$8,910 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $15,850–$40,360+ | $31,710–$80,710+ | $5,450–$13,860+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $25,940–$57,650 | $51,890–$115,300 | $8,910–$19,800 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $28,830–$69,180+ | $57,650–$138,360+ | $9,900–$23,760+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $46,120–$69,180 | $92,240–$138,360 | $15,840–$23,760 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Mid-Coast fence rules · Read the full rules
We’ve checked some of Mid-Coast’s pages, not all. Where there’s no council rule on file we show the New South Wales rule. Check with council before you build.
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 115.3 m is $8,530–$11,530.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
The property owner usually pays the full cost. About 47% of local lots have a laneway.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Krambach is $8,530–$11,530.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.